-
Phone
18924062676
-
Address
101, No.3 Jiangjunzi Road, Dalong Street, Panyu District, Guangzhou City
Guangzhou Yuexin Experimental Equipment Co., Ltd
18924062676
101, No.3 Jiangjunzi Road, Dalong Street, Panyu District, Guangzhou City
boxType structure;Comes with a built-in water tank for circulating water; StorageInside the water tankhaveWater level float valve,Automatic water inlet control and low water level alarm detection.
5There is transparency on the doorObservation window(Tempered glass material)LED lighting fixtures are installed inside the box for convenienceObserve the internal testing situation.
6IPX1/2:The drip tank adopts a vacuum design,Stainless steel materialmanufacture;The nozzle contact position adopts a brass conical design for easy installationwater sprayneedleMouth.
7IPX1/2:Equipped with compressed air air drying function, after the test is completed, excess water in the drip box can be completely removed to avoid long-term accumulation of water and scaling, which can block the pinhole.(Note: The user needs to provide a gas source)
8IPX3/4:putThe tube drive adopts a domestically produced servo stepper motor, with adjustable tube swing speed and angle.
9changeTaiwan driver: using domestically produced stepper motors, the speed and angle can be controlled by touchcontrolOn screen settings(adjustable)It is infinitely adjustable within the standard range and can automatically control forward and backward rotation(Forward and reverse:Suitable for conducting sample power on testing to prevent wire winding.
10tryInstallation of inspection boxThere is a sample power socket available(AC220,10A),The sample power supply can be powered on or off for a certain period of timepass throughProgram control:Power outage(0-999min)—power on(0-999min)—power failure(0-999min),Suitable for testing samplescentrePower on/off is required.
11measureTest time is availableOn the touch screensettingThe setting range is0-999min (adjustable).
12、pitHeart controlsystemuse7-inch touch screen+Panasonic PLCThe electrical components are made of imported brands such as LG and Omron, and the wiring process meets standard requirements. The electrical board layout is reasonable, the wiring is firm, and the labeling is clear.
basicparameter | |
inside dimensions |
Length 900 x Depth 900 x Height 1050mm |
Outer Dimensions |
make an appointmentLong 1350 x Depth 1150 xHigh 1750mm |
Turntable diameter |
∅400mm |
Rotating platform load-bearing capacity |
50KG |
Turntable lifting height |
450-750 mm |
Tilt angle of turntable |
0 ° or 15 ° (horizontal direction) |
Turntable speed |
1-5 r/min (adjustable) |
Rotation mode of turntable |
Continuous forward rotation/alternating forward and reverse rotation/intermittent rotation |
Test time |
0-999 min |
Total weight of equipment |
About 230kg |
IPX12 Part - Technical Parameters | |
Drip board area |
600×600mm |
IPX12 spray hole size |
Diameter 0.4mm |
Distance between drip holes |
20×20 mm |
rainfall |
IPX1:1mm/min; IPX2:3mm/min |
Flow regulation method |
Manual adjustment |
Drip board lifting method |
Non adjustable (fixed) |
IPX34 Part - Technicalparameter | |
Radial size of swing pipe |
R400mm |
Swing tube flow rate |
IPX3:1.1L/min; IPX4:1.8L/min |
Spray aperture size |
0.4mm |
Spray aperture spacing |
50mm |
Inner diameter of swing tube |
15mm |
Pipe angle |
120 º (IPX3), 350 º (IPX4) or custom settings |
Swing speed of swinging tube |
240 ° round-trip 4S, 720 ° round-trip 12S (control) or customized |
Electrical parameters | |
Equipment power supply |
220V |
Test sample power supply |
220V |
Power |
1.0KW |


