Computerized oil seal rotation performance testing machine

1、 Overview:
The oil seal rotation performance testing machine is suitable for studying the sealing performance of various rotary oil seals, and determining the quality of the oil seal based on the results. Set test requirements such as test time, test speed, and test temperature through computer control. The oil seal is installed on the testing machine, and the spindle rotates at a certain speed. After a certain period of operation, observe whether the oil seal leaks. Two oil seals can be tested each time, and forward and reverse rotation can be performed during oil seal testing. According to the characteristics of the experiment, the experiment time can be set, and interval experiments can be conducted to obtain the total experiment time from a total timer. Test completion: Test parameters such as test time and test curve can be printed in real-time. This machine has a novel structural design, computer-controlled, automated, easy to operate, large starting torque, wide speed measurement range, small torque change rate, and low noise. comply withGB/T14273Performance test method for rotary shaft lip seals（Rotary shaft lip type seals-Performance test proceduces）Standard.

2、 Technical parameters:
1 Spindle speed:0-8000r/min(Stepless speed regulation)
2 Spindle runout error:<>
3 Axis offset adjustment amount:0-1mm
4 Temperature regulation range:0-200℃
5 Usage pressure: ≤0.06MPa
6 Simultaneously test the number of oil seals:2a
7Testeable range of oil seal shaft holes:Outer diameter less than260mm
8 Motor power:2.2Kw×2
9 Power Supply:AC380VThree phase four wire system (required neutral wire) ±10% 50Hz
10 Overall dimensions:1100×770×1400mm
11 Quality:300KG