-
Phone
13790503672
-
Address
No.1 Yimin Road, Mintian Industrial Zone, Shatian Town, Dongguan City, Guangdong Province
Product Categories
- Fully automatic tunnel vacuum drying equipment production line
- vacuum oven
- High temperature conversion oven
- Waterproof laboratory
- High and low temperature test chamber
- thermal shock chamber
- Condensed water testing machine
- GB/T31467.3-20
- high temperature test chamber
- GB/T31485-2015
- Humidity Chamber
- Tensile testing equipment
- GB38031-2020
- Vibration testing system
- Battery separator testing machine
- GB31241-2014
Dongguan Saice Testing Equipment Co., Ltd
Constant temperature and humidity testing machine [rapid temperature deformation]
NegotiableUpdate on 02/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Constant temperature and humidity testing machine [rapid temperature deformation]
Product Details
Test the heat resistance, cold resistance, dry resistance, and moisture resistance of various materials, suitable for quality inspection of various aerospace and electronic products
Constant temperature and humidity testing machine【 Rapid thermal deformation 】 Meet the test standards
GJB150.4A-2009 Low temperature test method
GB2423.22-2008 Temperature Change Rate of Temperature Change
GBT 2424.5-2006 Temperature Test Chamber Performance Confirmation
GB/T 10589-2008 Technical Conditions for Low Temperature Test Chamber
GB/T2423.3-2008 (IEC68-2-3) Constant Damp Heat Test Method
JB150.9A-2009 Damp Heat Test Method
GB/T5170.18-2005 Temperature/Humidity Combined Cycle Test
GB/T10586-2006 Technical Conditions for Damp Heat Test Chamber
GBT 2424.6-2006 Performance Confirmation of Temperature and Humidity Test Chamber
GBT 2424.7-2006 Measurement of Temperature Test Chamber
specifications
| model | CZ-C-80 (A~G) | CZ-C-150 (A~G) | CZ-C-225 (A~G) | CZ-C-408 (A~G) | CZ-C-608(A~G) | CZ-C-800 (A~G) | CZ-C-1000 (A~G) |
|---|---|---|---|---|---|---|---|
| Internal dimensions (cm) | 40x50x40 | 50x60x50 | 50x75x60 | 60x85x80 | 80x95x80 | 100x100x80 | 100x100x100 |
| External dimensions (cm) | 90x136x94 | 100x146x104 | 100x161x117 | 110x171x137 | 130x181x137 | 150x186x137 | 150x186x157 |
| temperature range | -70℃~+100℃(150℃) (A:+25℃ B:0℃ C:-20℃ D:-40℃ E:-50℃ F:-60℃ G:-70℃) |
||||||
| Humidity range | 20%~98% R.H. (10%~98% R.H/5%~98% R.H are special selection conditions) | ||||||
| Temperature and humidity analysis accuracy/uniformity | ±0.1℃； ±0.1%R.H./±1.0℃； ±3.0%R.H. | ||||||
| Temperature and humidity control accuracy/fluctuation | ±1.0℃； ±2.0%R.H./±0.5℃； ±2.0%R.H. | ||||||
| Heating/cooling time | An average temperature of 2~15 ℃/min (only machines with a cooling rate of 5~15 ℃/min and a capacity of 408L or above are allowed) | ||||||
| Internal and external materials | The outer box is made of SUS304 # stainless steel with a shiny surface stripe treatment, and the inner box is made of SUS 304 # stainless steel | ||||||
| Insulation material | High temperature resistant and high-density vinyl chloride acetate foam insulator material | ||||||
| Cooling system | Wind and water-cooled/two-stage compressor | ||||||
| Protector | Non fuse switch, compressor overload protection switch, refrigerant high and low voltage protection switch, over humidity and over temperature protection switch, fuse, fault warning system | ||||||
| accessory | Recorder (optional), viewing window, 50mm test hole, PL box light, partition, dry wet ball gauze | ||||||
| controller | Choose between the Korean "TEMI" or Japanese "OYO" brand | ||||||
| compressor | French "Taikang" brand | ||||||
| power supply | 3Φ 380VAC±10% 50/60Hz | ||||||
Similar Product Recommend
