Corn processing water blanching machine

　　Corn processing water blanching machineIt is a combined production line equipment consisting of four major systems: peeling system, crushing system, grading system, and air mesh dust removal system. It solves technical difficulties such as stuffiness and slow discharge. In addition, it has added an automatic discharge adjustment system to maintain the old dual inlet, reduce mechanical wear and increase machine life, and keep the machine in good working condition. It is currently the most advanced corn processing equipment.

When corn, rice, wheat, etc. enter the peeling chamber from the hopper, they move forward under the rotation and pushing of the pushing ribs. In the peeling chamber, due to the gradual reduction of the working chamber volume and the influence of mechanical resistance, the density between corn kernels increases, and the squeezing and matchmaking effects inside the machine are enhanced. The rollers continue to flip and push, and the friction and peeling effects between mechanical parts prevent the corn kernels from being completely peeled off. The corn kernels, after being cleaned, enter the crushing system. Under the crushing and traction of the traction clutch crushing device, the material travels during the crushing process and enters the grading system for automatic separation, obtaining corn flour, corn coarse grains, and corn small grains. They are then cleaned and dedusted by the air mesh dust removal system, resulting in products with uniform size, no edges, bright color, and taste.

Work steps:

(1) Clean up. The oil entering the processing plant contains certain impurities (mud, stones, iron filings, etc.). If not carefully cleaned, it will accelerate the wear of the internal components of the oil press, reduce the oil output rate, and even cause malfunctions and accidents. The supporting equipment includes cleaning screens, stone removal machines, magnetic separators, etc.

(2) Peel off the shell. For oil with shells, the shells should be peeled before pressing, which can improve production capacity and oil yield. The supporting equipment includes: shell stripping machine, separation screen, separator, etc.

(3) Broken. Some oils and fats can be pressed as a whole, but after crushing, rolling and pressing, the oil yield can be significantly improved. The supporting equipment includes crushers, rolling mills, etc.

(4) Steaming is wonderful. Steaming and frying is an important step in improving oil yield. The commonly used method is to wet the oil first, and then dry it in a pot to achieve the required moisture and temperature for the process. The supporting equipment includes: steaming and frying pan, frying pan.

　　Corn processing water blanching machinePrecautions for use:

1. When choosing, it is important to carefully check the quality of the equipment. High quality equipment can reduce the occurrence of failures during use. Through reasonable application, it can improve production efficiency, operate reliably, have stable processes, support various systems, and ensure smooth processes, ensuring the production efficiency of the enterprise.

2. As the saying goes, the beginning is half the battle, so installation is also a very serious job that must be done carefully and cautiously. During installation, the dimensions of each installation foundation should be checked according to the plan and foundation drawings to ensure that they meet the requirements of the drawings. If there are any discrepancies, they should be repaired until the dimensions are correct before installation. In addition, in order to avoid deformation, damage or loss during transportation, it is necessary to check and accept the equipment list before installation, and take corresponding measures before installation.

3. When in use, there are also certain requirements for corn raw materials. Generally speaking, corn with fewer impurities is more suitable for processing. In addition, when collecting corn raw materials, it is inevitable that there will be broken grains. Maintaining an appropriate amount of broken particles at this time will help with better processing in the future.