Corrosion resistant pressure transmitter CYB601MS/CYB602MS

NegotiableUpdate on 12/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1、 Product Introduction: The anti-corrosion pressure transmitter uses high-performance ceramic pressure resistance sensors, which are processed with instrument specific circuits and output industrial standard signals. The connector is made of polytetrafluoroethylene material, which has the characteristics of strong corrosion resistance and good stability

Product Details

Brief introduction

The anti-corrosion pressure transmitter uses high-performance ceramic pressure resistance sensors,Cooperate with instrument specific circuits to process and output industrial standard signals,jointUsing polytetrafluoroethylene material, it has the characteristics of strong corrosion resistance and good stability.

such productSuitable for industrial site controlStable and reliable performance、Easy to install, widely used for automatic pressure control of gases and liquids in industrial control processeschangemeasuregiveControl.

IIProduct Features

●The material in contact with the medium is ceramicreachPolytetrafluoroethylenematerialGood corrosion resistance

●Resistance to impact, vibration, and wear

●High stability and reliability

●Quick response, without delay

●degrees of protection provided by enclosureIP65

● beltLED display or without display

3、 Main parameters

measuring range	0~50KPa……1.6MPa	measuremedium	Regarding ceramicsreachPolytetrafluoroethylene compatibleGas, liquid
Overload capacity	1.5 times the measuring range	pressure type	gauge pressure
refinedtruelinear measure	±0.5%F.S	mediumtemperature	-20-80℃
power supply	12-36VDC(Calibration value 24VDC)	load resistance	（U-15)/0.02
output signal	4-20mA 1~5VDC RS485	response time	≤1ms
pressure port	M20×1.5	protection grade	IP65

4ELECTRICAL WIRING

图片1.png

5、 Product selection

CYB601MS								antisepsistypepressure transmitter
CYB602MS								antisepsisDigital displaypressure transmitter
	G							gauge pressure
		0~X (KPa or MPa)						range
			J05					±0.5%FS
				C1				4~20mA output
				C3				1-5VDC output
				C4				RS485 output
					M1			M20 × 1.5 external thread
					M0			special
						V1		24VDC power supply
							F2	Terminal outgoing line
							F0	special