Cuff style beverage shrinking machine

Product Name: Cuff style Beverage Shrinking Machine Product Model: XJ-6040 Product Introduction: The cuff style beverage shrinking machine adopts a three feed type, and the feed can be selected from single row, double row, and three row. It can automatically wrap, seal, heat shrink, cool and shape the packaged items according to customer needs, and the whole set of actions can be synthesized by one machine

Product Name: Cuff style Beverage Shrinking Machine

Product model: XJ-6040

Product IntroductionThe cuff type beverage shrinking machine adopts a three feed type, with single row, double row, and three row feeding options. It can automatically wrap, cut, heat shrink, and cool the packaged items according to customer needs, and the entire set of actions can be synthesized in one machine.

Scope of ApplicationSuitable for bottomless heat shrink packaging of various bottled products such as cans, glass bottles, beer, mineral water, beverages, daily necessities, etc. It is also used in conjunction with a constant temperature PE shrink furnace to achieve the desired packaging effect. Suitable for shrink films such as PE and PVC.

Technical Specifications:

Sealing and cutting machine

Machine model: XJ-6030

Mechanical dimensions: L2730 × W1350 × H2000mm

Packaging size: W+H ≤ 700mm

Furnace cavity size: 700mm

Packaging speed: 8-18 pieces/minute

Power: 2kw

Net weight: 420kg

Power supply: 3 × 220V/380V, 50-60Hz

Gas source used: 6kg/square centimeter

High current: 10A

Shrinking machine

Machine model: XJ-6040

Mechanical dimensions L2700 × W900 × H1600

Packaging size: L1500 × W450 × H300mm

Furnace cavity size: L1800 × W600 × H400mm

Packaging speed: 20-80 pieces/minute

Net weight: 600kg

Power: 22kw

Power supply: 3 ✘ 220V/380V, 50-60Hz

Using gas source:/

High current: 35A

Product Features:

1. Adopting advanced control components, with stable and durable performance;

2. The sealing knife adopts a special design, with a firm seal, no cracking, and no sticking to the knife;

3. Automatic feeding, pushing, film feeding, sealing and cutting;

4. Infinite mechanical speed regulation, adjusting the speed of the feeding conveyor belt;

5. Easy and simple operation, changing different specifications can be completed in 2-3 minutes;

6. The direction of the feeding conveyor belt can be designed as left or right feeding according to customer needs;

Plan view of cuff type beverage shrinking machine:

Installation process:

1. Place the machine on flat ground and check for any looseness, displacement, or other issues during the transportation of its various components. After checking for accuracy, connect the power supply.

2. Install the propulsion cylinder kit attached to the packaging box according to the instructions.

3. Connect the conveyor table and adjust the spacing between the protective plates and isolation plates at the edges of the conveyor table.

4. Adjust the positioning gate, which is driven by a constant pressure cylinder and mainly functions to prevent the packaging behind from squeezing the packaging in front of the pushing plate. During mediation, make sure the knife is just between the bottles.

5. Connect one end of a flexible air pipe with an outer diameter of 8mm to the air source, and fix the other end to the intake joint of the two-piece on the lower right side of the machine. Push the air pipe into place and tighten it with bolts.

6. When the air source pressure is ≥ 6kg/cm2, check whether the pressure gauge of the two-piece is between 4-6kg/cm2. When the machine is running normally, its pressure should not exceed 6kg/cm2, and the air source pressure of the external two-piece should not exceed 9.5kg/cm2

7. Connect the power supply and adjust the appropriate sealing time, usually set to about 1.5 seconds. The specific time can only be determined through sealing experiments; Set a constant pressure delay, which is used to reduce the inertia of the conveyor line squeezing the already in place packaging, so it is set to about 0.5 seconds; The setting of the detection delay is to ensure that the next package that is about to arrive can arrive smoothly, usually set at around 0.4 seconds. The setting of the fixed retreat delay means that when the constant pressure cylinder retreats, the front conveyor platform does not immediately run, but runs after an appropriate delay to prevent the bottle from tipping over. It is generally set to about 0.3 seconds.

8. According to the material thickness of the shrink film, the sealing temperature is set to around 180 ℃.

9. According to the size of the packaging, adjust the travel of the packaging, adjust the fixed packaging pressure plate, and adjust the speed of the front and rear conveyor tables.

10. After completing the above operations, you can start working.

High quality packaging effect: