Current isolation transmitter

Key Features
Accuracy level: 0.1 level, 0.2 level, 0.5 level. The product has been inspected and calibrated before leaving the factory, and users can use it directly.
International standard signal input: 0-5V/0-10V/0- ± 5V, 0-10mA/0-20mA/4-20mA/0- ± 20mA, etc.
Output standard signals: 0-5V/0-10V/1-5V, 0-10mA/0-20mA/4-20mA, etc., with high load capacity output.
Linearity within the full range of * (nonlinearity<0.2%), without zero point and gain adjustment.
Four isolation between signal input/signal output 1/signal output 2/auxiliary power supply.

Example of Product Selection 　　　
Example 1 Input: 0-5V Auxiliary power supply: 24VDC output 1:4-20mA output 2:4-20mA
Product model: DIN 1X2 ISOEM U1-P1-O1

Example 2 Input: 4-20mA Auxiliary power supply: 24VDC Output 1:4-20mA Output 2:0-5V
Product model DIN 1X2 ISOEM A4-P1-O1O4

General Parameters
Accuracy: 0.1%, 0.2%, 0.5% Isolation: Signal Input/Output/Auxiliary Power Supply
Auxiliary power supply - DC5V, 12V, 24V, ± 10% insulation resistance - ≥ 20M Ω
Working temperature -25-+70 ℃ withstand voltage - Signal input/output/auxiliary power supply
Working humidity: 10-90% (no condensation) 2500VDC, 50Hz, 1 minute, leakage current 1mA
Storage temperature ----------------------------------------------------------------------------
Storage humidity: 10-95% (no condensation)

Industrial field sensors and instruments, PLC, DCS and other control systems often fail to function properly due to system interference, active signals, passive signals, signal conflicts between active and passive loads, and impedance matching issues. The correct selection of isolation amplifier transmitters can effectively solve the problems of signal interference, impedance matching, and conflicts between signal sources and control systems. The ISO series isolation amplifier transmitter products developed and produced by Shunyuan Technology can meet the requirements of analog signals collected by instruments, PLCs, DCS, DSP equipment, and various sensors such as temperature, displacement, pressure, frequency, etc. on site, which can be transmitted through isolation, amplification, conversion and matching.The following are common connection schemes for industrial field sensors and instruments, PLC, DCS, PAC, PCC and other display control systems for reference.

Isolation amplifier transmitters are generally used in industrial sites with complex electrical environments. In order to prevent various interferences or damages to the product caused by the on-site environment, we have gradually improved the protective measures of the product based on years of production experience and user feedback in different environments, without affecting product performance. For DIN 35 rail mounted products, these protective circuits are installed on-site and can be directly used by users. For IC packaged products, protection circuits cannot be loaded due to size and space constraints. Therefore, users are requested to install protective circuits for the signal input, output, and auxiliary power supply of IC packaged products based on their usage environment.Here are several basic protection circuit solutions provided by Shunyuan Technology Company for your reference.

Product appearance and installation method reference