-
E-mail
autopack@163.com
-
Phone
13679028848
-
Address
1802A, Building 1, Jewelry Center, No. 52 Shuxi Road, Jinniu District, Chengdu City
Product Categories
Sichuan Xinghuo Packaging Equipment Co., Ltd
Desktop vacuum capping equipment
NegotiableUpdate on 10/31
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Desktop vacuum capping equipment Product model: X35B3 Product introduction: Desktop vacuum capping equipment Ordinary type refers to the X35B3 type whose body frame adopts carbon steel hot plate and the surface adopts electrostatic spraying technology
Product Details
Desktop vacuum capping equipment
Product model: X35B3
Product Introduction
The common type of desktop vacuum capping equipment refers to the X35B3 type with a body frame made of carbon steel hot plates and a surface treated with electrostatic spraying technology.
Working Principle:
This is a device suitable for vacuum packaging of glass bottles with tin claws in the canned food industry. It adopts the open fully sealed vacuum chamber technology applied to capping and sealing machines, and is a semi-automatic model (manual capping, manual bottle entry and exit, manual vacuum chamber closure). Using pneumatic drive to rotate the cover, precise control of actuator pressure to achieve torque control, and non frictional torque limitation for longer service life; Due to the use of reliable fully sealed technology, the ideal vacuum degree can be achieved by configuring a low-power vacuum pump, and the vacuum degree can be set as needed.
Scope of application:
The X35 series models are economical, widely applicable, easy to use, reliable, and mobile, suitable for small production workshops, special specification applications, and laboratory use. Suitable for bottle body with a diameter of 4-11 centimeters and a height of 5-18 centimeters, suitable for circular and irregular bottle bodies. Suitable for standard tinplate claw type opening covers with diameters ranging from 30 to 85 millimeters.
Applicable cover type range: According to the general cover type range of QB/T 1499-2000 standard, the outer diameter range of the cover is 33.5-85 millimeters Cover thickness 8.6-16mm.
Applicable bottle range: The bottle mouth size should comply with the various standard cap types specified in QB/T 1499-2000 standard, as well as non-standard cap types within this range. The bottle body can have circular and non-circular cross-sections, and the diameter of the containment circle at the largest part of the bottle body should be within 110 millimeters, and the height of the bottle should not exceed 180 millimeters.
Applicable cover type range: According to the general cover type range of QB/T 1499-2000 standard, the outer diameter range of the cover is 33.5-85 millimeters Cover thickness 8.6-16mm.
Applicable bottle range: The bottle mouth size should comply with the various standard cap types specified in QB/T 1499-2000 standard, as well as non-standard cap types within this range. The bottle body can have circular and non-circular cross-sections, and the diameter of the containment circle at the largest part of the bottle body should be within 110 millimeters, and the height of the bottle should not exceed 180 millimeters.
Technical advantages:
1. Thoroughly solve the problem of replacing bottle shaped parts, and can complete the conversion between two different bottle shapes within 1 minute without the need to replace parts;
2. The use of linear motion components and integral pneumatic torque components further improves the quality and operational performance of the twist cover;
3. Adopting high-quality PLC (program controller) produced in Taiwan, which is more reliable than the previous version of relay logic circuit;
4. Adopt pneumatic vacuum switching valve for fully automatic models to make the vacuum response faster;
5. Equipped with a dedicated assembly base as standard, it can be used on the ground for greater flexibility.
2. The use of linear motion components and integral pneumatic torque components further improves the quality and operational performance of the twist cover;
3. Adopting high-quality PLC (program controller) produced in Taiwan, which is more reliable than the previous version of relay logic circuit;
4. Adopt pneumatic vacuum switching valve for fully automatic models to make the vacuum response faster;
5. Equipped with a dedicated assembly base as standard, it can be used on the ground for greater flexibility.
Technical Specifications:
Machine dimensions: width 350 millimeters, height 790 millimeters, depth 460 millimeters. (Excluding base size)
Reference production capacity: 450~500 bottles per hour, depending on actual factors such as operator proficiency, workbench layout, can lid type, vacuum system, etc
Vacuum index: Equipped with a 1.1 kW (model 2X-8) two-stage rotary vane vacuum pump for testing, the ultimate vacuum exceeds -0.09MPA
Power supply: 220V AC (lighting power)
Compressed air: Pump flow rate requirement is above 0.11 cubic meters per minute, 0.7 megapascals (7 kilograms per square centimeter)
Vacuum pump: pumping capacity of 8 liters per second
Reference production capacity: 450~500 bottles per hour, depending on actual factors such as operator proficiency, workbench layout, can lid type, vacuum system, etc
Vacuum index: Equipped with a 1.1 kW (model 2X-8) two-stage rotary vane vacuum pump for testing, the ultimate vacuum exceeds -0.09MPA
Power supply: 220V AC (lighting power)
Compressed air: Pump flow rate requirement is above 0.11 cubic meters per minute, 0.7 megapascals (7 kilograms per square centimeter)
Vacuum pump: pumping capacity of 8 liters per second
