Dew point transmitter EA2-TX-100

NegotiableUpdate on 01/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The design concept of the dew point transmitter EA2-TX-100 is simplicity and ease of use, and its integrated features are designed to simplify installation and usage services as much as possible. The transmitter that is set up and calibrated makes dew point measurement as easy as temperature and pressure measurement, and can be directly connected to your air or gas management and control system.

Product Details

Dew point transmitter EA2-TX-100The design concept of Easidew transmitter is simplicity and ease of use, and its integrated features are designed to simplify installation and usage services as much as possible. The transmitter that has been set up and calibrated makes dew point measurement as easy as temperature and pressure measurement, and can be directly integrated into your air or gas management and control system.

Product Highlights

Range -110 to+20 ° Cdp
Dew point or ppmv humidity output
Two wire power supply circuit connection
Accuracy ± 2 ° Cdp
Traceable verification certificate
Power supply 12-28 V DC
Easew I.S.IECEx, cCSAus, FM, and ATEX licenses
Reduce ownership costs and simplify maintenance
316 stainless steel sensor and sampling sleeve
5/8 "WWF, 3/4" WWF, G 1/2 "process connection
MiniDIN 43650, M12 electrical connector
Oxygen cleaning service

Easidew Transmitter

Technical Specifications

	Easidew, Easidew M12, and Easidew 34 transmitters	Easew I.S. transmitter
product
range	-Dew point from 110 to+20 ℃; -Dew point ranging from 100 to+20 ℃; Non standard range can be provided upon request
precision	± 2 ° C dew point*
response time	5 minutes to T95 (dry to wet)
repetitiveness	Dew point at 0.5 ° C
verify	Traceable 13 point verification certificate
Electrical parameters
output signal	4-20mA (2-wire connection, current source); User configurable range Easidew M12: RS485 Modbus RTU
output	Dew point or humidity
Analog output proportional range	Dew point: -110 to+20 ° C;; Humidity in gas: 0 to 3000 ppmv. ppmV
power supply voltage	12 to 28 V DC
load resistor	Max 250 Q @ 14 V (500Ω @ 24 V)
current consumption	23 mA max， Depends on the output signal
CE conformity UL61010-1 & CAN/CSA C22.2 No. 61010-1	Licensed
working conditions
Operating Temperature	-40 - +60°C
Compensation temperature range	-20 - +50°C
Storage temperature	-40 - +60°C
operating pressure	大 45 MPa (450 barg)
traffic	1 - 5Nl/min， Installed in a standard sampling sleeve; 0-10m/sec direct insertion
mechanical parameters
Protection level	IP66 according to BS EN 60529:1992 standard; NEMA 4 protection specified in NEMA 250-2003 standard Easidew M12: IP65
Intrinsic Safety Zone Certificate		ATEX: II 1 G Ex ia IIC T4 Ga（-20 至 +70 °C） IECEx: EX ia IIC T4 Ga (-20 to +70 °C) TC TR@ 0Ex ia IICT4 Ga (-20 to +70 °C) FM: Class I, Division 1, Groups A B C D, T4 CCSAUS: Class I, Division 1, Groups A B C D, T4
Oxygen service	Optional: Oxygen enriched cleaning service
housing material	316 stainless steel
size	MiniDIN 43650 Type C L=132mm x Ø 45mm (with connector cable) Easew M12: M12 5-pin L=155mm x Ø 45mm (with connector cable)
Filter (sensor protection)	Standard configuration: HDPE<10 μ m Optional: 316 stainless steel sintering protection<80 μ m
process connection	Easidew: 5/8” - 18 UNF Easidew 34: 3/4” - 16 UNF Easidew M12: 5/8” -18 UNF, 3/4” - 16 UNF, G1/2” BSP	5/8” -18 UNF, 3/4” - 16 UNF, G1/2” BSP
weight	150g
electrical connection	Easidew:Easidew: MiniDIN 43650 C 型 Easidew M12: 5 pins (code A)	MiniDin 43650 Type C
Electrical connector	Standard connector Easew M12: Optional 0.8, 2, and 5-meter M12 connectors/cables
Diagnostic conditions (factory programming)	condition Sensor malfunction Below the lower limit Exceed the limit output 23 mA 4 mA 20 mA
Permitted isolated safety barrier		KFD2-CR-EX1.20200 KFD2-CR-EX1.30200 KFD0-CS-EX1.50P KFD0-CS-EX2.50P KFD2-STC4-EX1.H MTL5041 MTL5040
*Overcompensation temperature range