Digital vibration transmitter HZD-B-X

NegotiableUpdate on 12/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The digital vibration transmitter HZD-B-X is suitable for vibration measurement of large rotating mechanical equipment such as steam turbines, water turbines, fans, compressors, oxygen concentrators, motors, pumps, gearboxes, etc., especially for the renovation of old units. Monitor the absolute vibration of rotating machinery, such as casing vibration, bearing vibration, frame vibration, etc; Monitor the increase in vibration caused by rotor imbalance, misalignment, loose components, damaged rolling bearings, gear damage, etc.

Product Details

Digital vibration transmitter HZD-B-X

3、 Measurement parameters

HZD-B-X vibration transmitter is paired with a vibration velocity sensor to measure the absolute vibration of rotating machinery bearings and output current signals. It can be used with computersDCSThePLCsystem,Connect devices such as paperless recorders.

Fault monitoring: Monitor the absolute vibration of rotating machinery, such as casing vibration, bearing vibration, frame vibration, etc; Monitor the increase in vibration caused by rotor imbalance, misalignment, loose components, damaged rolling bearings, gear damage, etc.
Measurement parameters: displacement, velocity.
Unit type: Monitoring of vibration in small and medium-sized units, such as steam turbines, fans, compressors, motors, pumps, gearboxes, etc; Especially suitable for the renovation of old units.
Installation requirements: Only one screw hole needs to be drilled on the casing to fix the sensor on the double headed screw, without any operation inside the machine.

数显振动变送器HZD-B-X

3、 Function Description:

Realize intelligent processing: Alarm values can be set arbitrarily through panel buttons

The panel buttons can adjust the range value without the need for potentiometer adjustment, making it convenient for on-site debugging

If you don't press the operation key for one minute, you can return to the running state by yourself

Alarm delay adjustment range1~60Seconds to prevent false alarms caused by on-site interference

There are current output terminals on the back panel that are proportional to the amplitude of the vibration, which can be connected to computersDCSThePLCConnection of devices such as systems and paperless recorders

Vibration displacement and vibration intensity can be freely switched

4、 Electrical indicators:

Power supply:24VDC,Maximum not exceeding36V(Can be customized according to needs)220VACOr other specifications).

Sensor input: magneto electric speed sensor

Measuring range:0～500Mm pk-pk

0～50.0mm/s rms

Measurement accuracy: Linear error ≤±1%(Full degree value)

Display mode: digital tube display

frequency Sound:5.0－300Hz

LEDInstruction: Normal（OK）Alarm(Alert)danger(Danger)

Alarm and danger settings: can be set arbitrarily within the full range

Current output:4～20mA; Drive500Ω load

Alarm contact capacity:AC220V/3A，DC28V/3A

5、 Physical indicators:

Overall dimensions:

Overall dimensions:70W×120L×75Hmm

Installation method: on-site installation

Weight: Approximately650g

6、 Environmental indicators:

Wen Temperature: Operating Temperature-25℃ to+60℃, storage temperature-30℃ to+70℃

relative humidity ≤90%,No strong magnetic interference

Digital vibration transmitter HZD-B-X