Disc brake cylinder

What hydraulic oil is used for the disc brake cylinder, how to determine the model, and what to do if the disc brake cylinder is pulled? Our company is a professional manufacturer of disc brake cylinders, and also customizes displacement adjustable cylinders, vehicle hydraulic cylinders, shock absorber hydraulic cylinders, horizontal telescopic cylinders, and vehicle lifting hydraulic cylinders. For customers' questions, our company will provide answers from this information.

Article Introduction:

• Basic Introduction
• Terminology Comparison
• Manufacturer Introduction
• reference price
• Maintenance and related issues

Basic introduction of disc brake cylinder

Disc brake cylinder: The cylinder barrel of the hydraulic cylinder requires processing technology. The cylinder barrel of the hydraulic cylinder is an important and essential component in the hydraulic cylinder because it plays an irreplaceable role. The processing requirements for this component are very high. After the cylinder barrel is processed, its surface roughness should reach 0.4-0.8um, and the requirements for coaxiality and wear resistance are also very high. When customizing oil cylinders, if there are high quality requirements for the cylinders, it is best to use rolling processing. Due to the residual compressive stress left on the surface layer, it helps to close small cracks on the surface and hinder the expansion of erosion. Thereby improving the surface corrosion resistance and delaying the generation or expansion of fatigue cracks, thus enhancing the fatigue strength of the cylinder. By rolling forming, a cold work hardening layer is formed on the rolling surface, reducing the elastic and plastic deformation of the contact surface of the grinding pair, thereby improving the wear resistance of the cylinder inner wall and avoiding burns caused by grinding. After rolling, the reduction of surface roughness value can improve the fitting properties. Normally, a hydraulic cylinder consists of main parts such as a rear end cover, cylinder barrel, piston, piston rod, and front end cover. To prevent the working medium from leaking out of the cylinder or from the high-pressure chamber to the low-pressure chamber, sealing devices (sealing rings) are installed between the cylinder barrel and end cover, piston and piston rod, piston and cylinder barrel, and piston rod and front end cover. There is also a dust-proof device installed on the outside of the front cover. To prevent the piston from quickly moving to the end of its stroke and hitting the end cap, a buffer device can also be installed at the end of the cylinder. When necessary, exhaust devices should also be installed for exhaust. Precautions for oil cylinder installation: Before installing the hydraulic cylinder into the system, the parameters on the hydraulic cylinder label should be compared with the parameters at the time of ordering. The base of the hydraulic cylinder must have sufficient rigidity, otherwise when pressurized, the cylinder barrel will arch upwards, causing the piston rod to bend. When using the oil cylinder, it is necessary to prevent internal leakage of the hydraulic cylinder. Internal leakage of hydraulic cylinders includes leakage caused by excessive wear of the hydraulic cylinder body seal, piston rod and seal cover seal, and piston seal. The reason for the leakage of the piston rod and sealing cover seal is due to the wrinkling, squeezing, tearing, wear, aging, deterioration, deformation, etc. of the seal. At this time, a new seal should be replaced.

Comparison of Terminology for Disc Brake Cylinder

Comparison of terms related to disc brake cylinder in Chinese and English

• Elastic seal
• Fluid power transmission
• Coil impedance
• Stacking valve sandwich valve
• Tank Lorry Ball Valves Tank Truck Ball Valve
• Piston rod seal
• Screw in connector: Threaded bushing
• Phase lag

Introduction to the manufacturer of disc brake cylinder

Our company specializes in designing disc brake cylinders and also sells hydraulic cylinders for scissor arms, height limiting cylinders, rack and pinion transmission cylinders, mixer truck hydraulic cylinders, and small swing cylinders. After years of hard work, our company has established reliable cooperative relationships with fiber material factories, mineral processing plants, printing equipment factories, paper asphalt felt manufacturing plants, flashlight factories, tung oil refining plants and other manufacturers.

Reference price for disc brake cylinder

The cost of disc brake cylinders is determined by factors such as frequency of use, thrust size, system pressure, and whether pressure maintenance is required. The temperature requirements vary, and the price also varies. The cost of common brands of disc brake cylinders ranges from 1500/yuan to 5000/yuan.

Maintenance and related issues of disc brake cylinder

• What are the principles behind the use of oil cylinders in plastic molds?
  Pressure cylinders can be divided structurally into piston cylinders, plunger cylinders, and swing cylinders Cylinders can be divided structurally into piston cylinders, diaphragm cylinders, and telescopic cylinders The working principle of a hydraulic cylinder is: first, let's talk about its five basic components: 1. cylinder barrel and cylinder head 2. piston and piston rod 3. sealing device 4. buffering device 5. exhaust device. The work of each type of cylinder used to be almost similar. Take a manual jack as an example, the jack is actually the simplest oil cylinder By manually increasing the pressure (hydraulic manual pump), hydraulic oil enters the cylinder through a single valve. At this time, the hydraulic oil entering the cylinder cannot be reversed due to the single valve, forcing the cylinder to
• What is a differential hydraulic cylinder?
  The so-called differential hydraulic cylinder connects the return oil with rod chambers through pipelines, allowing them to flow into rodless chambers, thereby accelerating the extension speed of the piston rod. Actually, a hydraulic cylinder is still a hydraulic cylinder, it just connects the oil circuit. The oil circuit connection method in which both chambers of a single rod hydraulic cylinder are filled with hydraulic oil is called differential connection.
• What material is the oil cylinder support ring
  Generally, there are various types of PTFE mixed with copper powder, polyoxymethylene, copper sleeves, nylon, and resin
• How to ensure the synchronization of two oil cylinders with a directional control when their loads are different
  Require the piston rod of the oil cylinder to extend synchronously: Install a diversion valve or synchronous motor at port A of the directional control valve, and connect it to the rodless chambers of two oil cylinders from the two outlets of the diversion valve. Require the outlet of the diversion and collection valve to be connected to the rod chambers of two oil cylinders when the piston rod is retracted synchronously. The synchronization performance depends on the quality of the diversion valve and the leakage situation of the hydraulic system.