Duct type temperature sensor QAM2161

NegotiableUpdate on 10/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Air duct temperature sensor 1. Application field: Used to collect the air temperature inside the air duct, supply or exhaust air temperature sensor, limited sensor

Product Details

Air duct temperature sensor
1. Application Fields
Used to collect the air temperature inside the duct
Air supply or exhaust temperature sensor
Limiting sensors, such as setting the minimum supply air temperature
Reference sensors, such as room temperature settings that convert according to a certain functional relationship with changes in external temperature
Measurement sensors, display of measurement values, or use in conjunction with building automation systems

2. Technical parameters
Material/Signal 0~10V
Measurement range: 0~50 ℃/-35~35 ℃/-50~50 ℃
Insertion length 400mm
精度 -25~25℃ ±0.75K， -50~50℃ ±0.9K
Response time 30 seconds
Protection level IP54
Power supply AC/DC24V
Wiring 3 wires

3. Installation precautions
The temperature sensor will be affected by the airflow velocity, and the airflow velocity near the sensor should not exceed 10m/s. Please note that when installing the sensor, a perforated protective cover or cover (such as a steel protective sleeve) should be used
Avoid installing in the dead zone of the flow (if there is no airflow, it may cause supersaturation)
If the sensor is installed in a negative pressure pipeline, gas may be drawn into the equipment and installation holes from the outside. (To prevent inaccurate readings, it should be effectively sealed)
There should be a test hole downstream of each temperature sensor, with a recommended diameter of 40mm