Dust Box Waterproof and Dustproof Testing Equipment Yuexin Strength Factory Stable Performance

Dust box

lProduct Introduction

Dust box is suitable for conducting IP of products5X、 IP6X DefensedustLevel testing.This devicehaveHeating systemAnd the vacuum system,The inner box, sample rack, etc. are all made of stainless steel plates，There is a dust replaceable device at the bottom of the equipment, which can easily replace used dust.

lProduct images

lBackground

The destruction of products and materials by natural dust (such as sand, dust, wind dust, etc.) causes incalculable economic losses every year. The damage caused mainly includes corrosion, fading, deformation, decreased strength, expansion, mold, etc., especially electrical products that are prone to fire due to short circuits caused by sand and dust. Therefore, conducting a dustproof test on the shell for a specific product or material is a key procedure.

lapplications

Outdoor lighting fixtures, household appliances, automotive accessories, and other electronic and electrical products.

lExecution standards

conform to IEC60529:1989 +A1:1999 +A2：2013《Degrees of protection provided by enclosures(IP Code)》、GB4208-2008《 The requirements of clauses 13.4 and 13.5 of the "Protection Level of the Shell (IP Code)" and Figure 3, as well as clauses 9.2.1 and 9.2.2 of GB7000.1 "Lighting Part: General Requirements and Tests" and Figure 6.

lEquipment parameters

lProduct Details

lProduct characteristics

1. Suitable for conducting IP5X and IP6X dust rating tests on products.

2. The shell is made of 304 stainless steel plate and coated with baking paint on the surface, which is beautiful and practical.

3. The inner box, sample rack, etc. are all made of stainless steel plates to ensure long-term use without rusting.

4. There is a transparent observation window (made of tempered glass material) on the door, and LED lighting is installed inside the box for easy observation of internal testing conditions.

5. There is a dust replaceable device at the bottom of the equipment, which can easily replace used dust.

6. There is a vibration device installed inside the box, which can automatically alternate work to prevent dust from not sticking to the box wall and condensing.

7. There is an exhaust pipe inside the box, which can complete the vacuuming action on the sample (the sample needs to reserve an exhaust hole position).

8. Sand and dust test box control system: using a 7-inch touch screen and Panasonic PLC, it can display year, month, day, time, working time, etc. Control the dust blower, dust vibration, and total test time separately; This controller has the following arbitrary setting control functions:;

a. Dust blowing time (stop, blow): Choose any time setting for continuous or periodic dust blowing;

b. Vibration time: The vibration and stop vibration time automatically alternate;

c. Preset test time: The test time is 99 hours and 59 minutes;

d. Power on: off - on - off.

9. Heating system: The circulating air duct is equipped with a heater to prevent dust condensation, and the pipeline is wrapped with mica heating coils for safe and stable heat.

10. Vacuum system: equipped with vacuum pump, vacuum gauge, air filter, flow meter, pressure regulating triple piece, and connecting pipe.