Electric triple eccentric butterfly valve VOCS tail gas butterfly valve with zero leakage Shanghai Fadeng/VTTEN
1、 The RTO triple eccentric zero leakage butterfly valve is designed as a flange type; Especially adopting a rear seat ventilation structure, there is no jamming phenomenon under low or high temperature conditions; It has the advantages of flexible opening and closing, and automatic sealing compensation with trace elasticity. Faden RTO triple eccentric zero leakage butterfly valve is suitable for regulating gas flow in environmental RTO and pipeline systems for air volume regulation and environmental protection in industries such as chemical, power plant, metallurgy, cement, etc.
2、 Main performance specifications:
1. nominal diameter: DN (mm) 50-3000
2. Nominal pressure: PN (Mpa) 0.05-0.3
3. Strength test pressure: PS (Mpa) PN x 1.5 times
4. Applicable temperature: t (° C) ≤ 650
5. Leakage rate: 0 leakage
6. Applicable media: exhaust gas, air; Dust gas; Harmful gases such as cold and hot
7. Medium flow direction: in any direction
8. Control form of medium: fully open Fully closed and 0-90? Adjust arbitrarily within the range
3、 Characteristics and standards:
1. This valve is welded with high-quality steel plates, which are small and lightweight, easy to decorate. The double design of the fitting part enhances its firmness.
2. Due to the vertical structure of the butterfly plate, the overcurrent area is large, the flow resistance is small, the switch is flexible, the operation is convenient, and it saves time and effort
3. Welding data: According to GB/T12224-2005 and GB/T19866-2005.
4. Drive device standards: comply with JB/T8864-2004, JG/T8528-1997, GB/T12222-1989
Waiting standards.
5. Manufacturing and acceptance shall comply with QB/THQB0102-1999, GB/T26480-2011, and JB/T248-1985.
If the temperature is too high, add a heat sink component to the neck to cool down and protect the driving device.
4、 Main component materials:
Valve body and butterfly plate: High quality carbon steel 16Mn 1Cr18Ni11Ti 316L 2Cr25Ni20
阀杆: 2Cr13 45# 4Cr14Ni14W2Mo 321 316 2Cr25Ni20
Sealing surface: Stainless special steel
Packing: Expanded graphite asbestos packing
0 Leakage Introduction:
Designed as a double eccentric form with a sealing surface on a slanted conical surface: using multi-layered elastic metal
Belonging to a hard sealed structure, it overcomes the drawbacks during use and is superior to organic material soft seals
It has been perfected, improved, and innovated, making it a more practical, innovative butterfly
Valve treasures. The operating temperature can reach 650 ℃.
0.3-1% leakage introduction:
Designed as a multi-layer elastic plate: adopting a rear seat multi-layer elastic plate structure, regardless of low temperature
Under high temperature conditions, there shall be no jamming phenomenon; Flexible opening and closing at the same time, with a slight elastic inlet
Advantages such as automatic sealing compensation; The operating temperature can reach 650 ℃.
The above prices are for reference only
