Electronic toy simulation transportation vibration test bench

Electronic toy simulation transportation vibration test benchThe large-scale simulated automobile transportation vibration table is a device used for conducting pre vibration tests on larger transportation products. Its working principle is the same as the previous small-scale simulated transportation vibration table: this type of equipment is manufactured according to transportation standards and improved based on similar equipment. Using eccentric bearings to generate elliptical motion trajectories during rotation to simulate the vibration and collision of goods during transportation by cars or ships. Fix the testing platform on the eccentric bearing, and when the eccentric bearing rotates, the entire plane of the testing platform will produce elliptical up, down, front, and back movements. Adjusting the eccentric shaft with the rotational speed is equivalent to adjusting the driving speed of a car or ship.

Electronic toy simulation transportation vibration test bench bigThe purpose of simulating the vibration table for automobile transportationSuitable for simulating transportation testing of toys, electronics, furniture, gifts, ceramics, packaging and other products, meeting transportation standards.

Characteristics of Large scale Simulated Vehicle Transport Vibration Table:

3.01 Low price, only 30% of similar products;

3.02 Digital instrument displays vibration speed r/min;

3.03 synchronous belt drive, durable;

3.04 The sample clamping adopts a guide rail type, which is easy to operate and safe;

The 3.05 machine base is made of heavy-duty channel steel with vibration damping rubber pads, which is easy to install and runs smoothly without the need for foot screws,

3.06 AC variable frequency motor speed regulation, smooth operation, strong load capacity;

3.07 Rotary vibration (commonly known as galloping), in compliance with transportation standards;

3.08 has independent time control and timing functions.

Performance parameters of a large-scale simulation vehicle transportation vibration table:

4.01 Applicable standards include EN, ANSI, UL, ASTM, ISTA international transportation standards.

4.02型号： ZD-5024

4.03 Dynamic speed: 100-300RPM (revolutions per minute)

4.04 Speed display accuracy: 1RPM (revolutions per minute)

4.05 Vibration mode: reciprocating (racecourse, elliptical vibration)

4.06 Amplitude (P-P): 25.4mm (1 inch)

4.07 Maximum load capacity: 200KG (other loads will be quoted separately after customer confirmation)

4.08 Effective countertop: 1600mm X 1200mm (length X width)

4.09 Overall dimensions: 1800mm X 1400mm X 1200mm (length X width X height)

4.10 Control box size: 500mm X 500mm X 980mm (length X width X height)

4.11 Guardrail height 450mm

4.12 Time setting range: 0 seconds to 99.99 hours per hour

4.13 Motor power: 2KW

4.14 Machine weight: approximately 200kg

For more information about the different sizes and loads of large simulated vehicle transportation vibration tables, please contact the manufacturer Guangdong Aipei Testing Equipment Co., Ltd. for consultation.