End face thermistor

NegotiableUpdate on 12/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The components of the end face thermistor factory are made of processed wire wound tightly at the front end of the thermometer. Compared with general axial thermistors, end face thermistors can more accurately and quickly reflect the actual temperature of the measured end face, and are suitable for measuring the end face temperature of bearing shells or other components.

Product Details

End face thermistorfactory building

● Main technical parameters

The resistance value (R100) of the temperature sensing element at 0 ℃ and its resistance R0 at 0 ℃

Index number Cu50: R0=50 ± 0.050 Ω
Cu100：R0=100±0.10Ω
Division number Pt100: R0=100 ± 0.12 Ω (Class B)
Among them, R0 is the resistance value of the component at 0 ℃.

Measurement range and tolerance (unit: mm)

name	Temperature measurement range ℃	Allowable deviation △ t ℃	graduation mark
End face copper resistor	-50-100	±（0.3+6.0×10-3\|t\|）	Cu50 （G）或Cu100
End face platinum resistor	-150-200	B-level: ± (0.30+0.005 \| t \|)	Pt100

● Model and specifications

model	graduation mark	structural characteristics	Temperature measurement range ℃	Protective tube material	Thermal response time	Specifications		Nominal Pressure	External wiring lead length L (mm)
						Diameter d (mm)	M（ mm）
WZCM-201	Cu50 Cu100	Fixed embedding or threaded connection	-50-100	Copper T2-Y	＜15	Φ 6	M8x0 .75	atmospheric pressure	500 1000 1500 2000 2500
WZPM-201	Pt100		-150-200		＜15	Φ 8.7	M10x1
WZPM-201B

Note: WZPM-201B uses component WZPM-018 with an accuracy level of *.

End face thermistorfactory building

● Installation form