Explosion proof pneumatic hammer dedicated controller

NegotiableUpdate on 09/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Attention: 1. When installing this machine, please fix it with bolts to prevent accidental injury caused by falling. 2. When moving the equipment, please first close the manual slide valve next to the controller to prevent accidents caused by the sudden start of the air hammer. 3. After the work is completed, please be sure to close the manual slide valve next to the controller, because during the continuous supply of air, the air hammer will continue to strike. 4. Unstable air pressure can cause the controller to malfunction, increasing the number of strikes when the air pressure rises and decreasing the number of strikes when the air pressure drops. Therefore, please install an air pressure regulating valve in front of the controller to facilitate the stable operation of the controller and air hammer. 5. If you need to install (electric control) as the air supply end of this controller and use it as a timer, please be sure to use a three-way solenoid valve. To facilitate the discharge of residual gases

Product Details

Successfully developed over 200 industry-specific motors for different equipment requirements

Attention: 1. When installing this machine, please fix it with bolts to prevent accidental injury caused by falling

2. When moving the device, please first turn off the manual slide valve next to the controller to prevent accidents caused by sudden activation of the air hammer

3. After the work is completed, please make sure to close the manual slide valve next to the controller, as the air hammer will continue to strike during the continuous supply of air

4. The instability of air pressure can cause the controller to malfunction, with an increase in air pressure resulting in an increase in the number of blows and a decrease in air pressure resulting in a decrease in the number of blows. Therefore, please install an air pressure regulating valve in front of the controller to ensure stable operation of both the controller and the air hammer

5. If you need to install (electric control) as the gas supply end of this controller and use it as a timer, please be sure to use a three-way solenoid valve to facilitate the discharge of residual gas