FC-260A01 piezoelectric triaxial force sensor

American PCB piezoelectric three-axis force sensor

Introduction: There are two types, one is conditioningPiezoelectric three-axis force sensor standard analog output type, with internal amplification circuit, directly outputs standard analog quantity

Model: FC-260A01 (Standard Analog Output Type)

Range: Fxy2200N Fz4500N

Overload capacity: Fxy3000N Fz6000N

Sensitivity: 0.56mV/N

Resolution bandwidth: Z direction 0.027 XY direction 0.009 rms

Frequency upper limit: 11kHz

Low frequency response (-5%): Z-axis 0.01Hz XY 0.001Hz

Comprehensive accuracy<1%

Crosstalk degree: Fy-x to Fy-x 3% Fx, Fy to Fz 5%

Temperature range for use: -54 ℃~121 ℃

Discharge time constant: Z-axis>50s XY axis>500s

Output impedance:<100 Ω

Bias voltage: 8~14Vdc

Excitation voltage: 20~30Vdc

Current consumption: 2-20mA

Polarity:+

Connector: 4PIN male connector

Rigidity: Z-axis 1.75kN/um XY axis 0.70N/um

Sealing: Welding sealing

Material: Stainless Steel 17-4

Maximum allowable torque: Z-axis 19 Nm XY axis 17.6 Nm


Keywords:

Dynamic three component force sensor, dynamic three-dimensional force sensor, dynamic three directional force sensor, piezoelectric three component force sensor,
Piezoelectric three-dimensional force sensor, piezoelectric triaxial force sensor, piezoelectric triaxial force balance