FFP2, FFP3, KN94 grade meltblown fabric, spunbond non-woven fabric, hydroentangled polarizing equipment manufacturer

NegotiableUpdate on 01/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The production process of hydroentangled polarizing equipment is as follows: Step 1: Select polypropylene particles as raw materials and transport them to the extruder

Product Details

The production process of hydroentangled polarization equipment is as follows:
Step 1: Select polypropylene particles as raw materials
The polypropylene particle raw material is transported to the extruder, and the raw material extruded by the extruder is sprayed out through the die head spinneret. The airflow generated by the air compressor is in the same direction as the spraying direction of the raw material. The air heater heats the airflow generated by the air compressor, and the receiving roller receives the raw material sprayed out from the die head spinneret, forming non-woven fabric after receiving it.
Step 2: Preparation of Pure Water
Select tap water as the water source, filter the water source through sand and gravel tanks and activated carbon tanks, add reverse osmosis agent and hydrochloric acid to the filtered water source, perform reverse osmosis membrane secondary filtration on the water source, and add alkaline industrial reagents to the filtered water source to complete pure water preparation.
Step 3: Electrification process
Transport the prepared pure water to the fan-shaped nozzle through a high-pressure water pump, and the fan-shaped nozzle performs water penetration on the meltblown fabric; By friction between pure water and non-woven fabric, charges are generated to achieve water jet polarization.
Step 4: Drying process
The non-woven fabric with water jet polarization is transported to the drying room through a conveying mechanism and dried using electric heating and hot air spraying; After drying, it is received by the receiving roller.
Parameters: