FMZ-200 Multi functional Flexible Electronic Printer

FMZ-200typeMulti functional flexible electronic printer

Keywords:3D direct writing printerMicroelectronic circuits,vision, curved surface, straight surface

1、 Product Introduction

FMZ-200 Multi functional Flexible Electronic PrinterIt is a multifunctional utilizationThe circuit direct writing molding instrument uses compressed air to inject ink into a syringe or storage bottle Water or slurry is pressed into the feed tube connected to the piston chamber, and direct writing is performed using pressure. When the piston is in the upward stroke, The piston chamber will be filled with ink or slurry; When the piston pushes down the ink droplet needle, the ink will be pressed out from the nozzle under pressure. The amount of ink dripped is determined by the distance of the piston's downward stroke, which can be manually adjusted or controlled through programming.This deviceCan write multiple materials directly, with very broad requirements for ink, viscosity range from over ten centipoise It can spray up to tens of thousands of centipedes, and can also be used on some micro curved surfaces. Ink or slurry can be pressed appropriately Spray or drip force and speed onto a curved surface. Accurate determination can be made based on pre-set paths, templates, or control systems Position and control. It is an important instrument for microelectronics research and new energy, as well as an important equipment for scientific research in higher education institutions.

（2） Product features:

• The software interface can be directly drawn, and you can draw it right away

• Any trajectory line: straight line, arc, not

Regular curves, polylines, polygons, circles, etc.• Dot, periodic dot matrix

• supportDirect import of CAD trajectory diagram

• One click direct writing printing

• Full visual function：• Laser automatic height measurement, compatible with irregular surfaces.

• Ink compatibility：low viscosity~High viscosity

• Platform vacuum adsorption,1mm suction hole

• Platform high temperature heating, Customizable temperature

（3） Main application areas:

Industry:• Preparation of Devices and Sensors

•Organic material devices

• Integrated circuits, semiconductors

•Aerospace, satellite

•Photovoltaic and new energy

•Biology, Medical and Health

• automotive industry

• Optoelectronic industry display lighting

• Academic and research fields

• Enterprise Development Center, etc

（4） Main skillsSurgical parameters:

_{Printing area:297*210mm}

_{Z-axis repeat positioning accuracy:±5um}

_{XY axis repeat positioning accuracy:±20um}

_{Mechanical extrusion shaft repeat positioning accuracy:±10um}

_{Three axis motion speed:0.1~50mm/s}

_{Temperature and humidity requirements:15-40 ℃ (5-80RH without condensation)}

_{High precision direct writing module:Integrated height calibration device for precise control of direct writing height, standard configuration14G~34G standard aperture dispensing head (minimum aperture 60um), optional high-precision dispensing heads with 20um and 30um apertures}

_{Slit coating module:Includes two types of high-precision scrapers, contact and non-contact, with scraper width40mm， High viscosity and low viscosity modules are optional}

_{Printer size(Length * Width * Height):554*554*483mm}

_{extrude3D printing module:Accurately control material extrusion to achieve simplicitySlicing and Layered Printing of 3D Structures}

_{Printer weight:45kg}

（5） Product features:

1Application case seriesPreparation of Curved Circuit

Application Case 2: Stretching and Wearable Circuit Preparation

Application Case 3: Preparation of Flexible Electronics and Devices