FP-30 Formaldehyde Gas Detector (Japan)

NegotiableUpdate on 11/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The FP-30 test strip photoelectric photometric formaldehyde detector is the only one that uses the national standard method, and the sampling and testing are completed simultaneously on site

Product Details

The FP-30 test strip photoelectric photometric formaldehyde detector is the only one that uses the national standard method and completes sampling and testing simultaneously on site.
FP-30 formaldehyde detector is a product of Riken Instrument Co., Ltd. in Japan, which has continuously developed advanced products in the fields of industrial disaster prevention and environmental monitoring, and has obtained ISO9001 quality system certification and ISO14001 environmental protection system certification. The winning instrument for Olympic venue testing.

Detection Principle
When gas is blown onto the detection TAB, the paper immersed in the coloring agent combined with the TAB will undergo a chemical reaction and change color. For example, after formaldehyde is attached to paper, the reagent contained in the paper will react with formaldehyde to form a compound, and the color will change from white to yellow. The degree of color change can reflect the amount of reflected light received. The rate of change in the intensity of reflected light can be used as a gas concentration response. By setting the detection line in advance, the concentration of the gas can be determined by the response value of the gas being detected.
Product Features:
1. Simply install the testing pills for easy detection
2. Comes with reliable self diagnostic function
3. Comes with automatic storage function for measurement data (99 sets) and can be downloaded to a PC
4. No preheating time required
5. Automatic backlit display
Technical Indicators:

gas detection	Formaldehyde in the atmosphere
Detection Principle	Experimental paper photoelectric photometry method
Testing Scope	0～0.4 ppm(TAB No.008) 0～1.0 ppm(TAB No.009)
Detection Time	30 minutes (1800 seconds), 15 minutes (900 seconds)
resolution	0.005 ppm and 0.01 ppm
Detection method	Detecting TAB method (adding calculated values within time)
Concentration representation method	LCD (Liquid Crystal Display)
sampling method	pump-suction type
working environment	-10～40℃; Below 90% RH (no condensation)
memory function	Detection points: 99 points (automatically stored upon completion of measurement), with automatic storage function for measurement data (99 sets) and downloadable to PC
Self diagnostic function	Self check for poor battery voltage, low pump, abnormal system, abnormal temperature, etc. in the light source and light receiving unit
power supply	4 alkaline dry batteries
Continuous usage time	About 12 hours (alkaline dry battery without lighting or alarm at 20 ℃)
Overall dimensions	Approximately 85 (W) × 190 (H) × 40 (D) mm (excluding protruding parts)
weight	About 500 grams (host)