Flat membrane pressure transmitter (for adhesive and viscous media)

NegotiableUpdate on 12/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The CYB13PC flat membrane pressure transmitter (for adhesive and viscous media) adopts a high-precision force sensing chip with imported stainless steel isolation diaphragm. After laser resistance adjustment and certain signal processing, it outputs an industrial standard 4-20mA signal. This product is mainly suitable for measuring the pressure of viscous media. The flat membrane structure of the sensor can prevent blockage, scaling, and unhygienic situations caused by viscous liquids. The sensor connection interface is threaded. This transmitter can be widely used in the fields of petroleum, chemical, coal mining, medicine, food, textile, etc. for automatic measurement and control of gas and liquid pressure.

Product Details

CYB13PCFlat membrane pressure transmitter (for adhesive and viscous media)

1、 Product Introduction

CYB13PCFlat membrane pressure transmitter (for adhesive and viscous media)High precision force sensitive chip using imported stainless steel isolation membrane, stimulated byLight modulation resistance and certain signal processing, outputting industrial standard4-20mA signal. This product is mainly suitable for adhesive bondingMeasurement of thick medium pressure. The flat membrane structure of the sensor can prevent blockage, scaling, and unhygienic conditions caused by viscous liquidshappen. The sensor connection interface is threaded.This transmitter can be widely used in petroleum, chemical, coal mining, medicineAutomated measurement and control of gas and liquid pressure in fields such as food and textiles.

2、 Technical performance

quantity Cheng Fan enclose	0～35…1000(KPa)
quantity Cheng Fan enclose	0～12. 2020(MPa)
pass load press 力	≤Rated range1.5 times
measure quantity between quality	and316L stainless steel compatible with various viscous media
lose go out 信 number	4～20mA Two line system
lose go out 信 number	0～5VDC three-wire system
supply electricity electricity press	12-36VDC (calibrated value is+24VDC)
essence indeed degree	±0.25%F. S ±0.5%F. S
long period stable fixed sex	≤± 0.2% F.S/year
between quality Wen degree	－20～+85℃
ring should time interval	≤1ms
press 力 pick up 口	M20*1.5 G1/2
electricity qi pick up 口	Hirschmann connector/Waterproof direct outlet
prevent protect wait level	IP65

3、 Product Features

● 316L stainless steel isolation membrane structure
●QiFlat film design suitable for viscous media
● High precision, high stability
● All stainless steel structure
●Threaded interface, easy to install

4、 Exterior structure

平膜压力变送器（胶类及粘稠介质）

5、 Product selection

CYB13PC							Flat membrane pressure transmitter
	G						gauge pressure
	A						Absolute pressure
		0~X (KPa or MPa)					range
			J02				±0.25%FS
			J05				±0.5%FS
				C1			4~20mA output
				C2			0~5VDC output
				C0			special
					M1		M20×1.5external thread
					M1A		G1/2external thread
					M0		special
						F1	Husman connector outlet
						F2	Waterproof direct outlet