Four channel point light source type UV LED light curing device (UV LED point light source)

NegotiableUpdate on 02/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The UV LED point light source BUV-6B is a UV device that uses LED as the light source to irradiate UV resin (UV glue, ink, adhesive, coating) with ultraviolet light, achieving rapid curing of the resin. Precision bonding is achieved by concentrating UV light on the UV resin applied to micro surfaces such as lenses of CD, MD, DVD players, and LCD panels of laptops.

Product Details

UV LED point light source BUV-6BIt is a UV device that uses LED as a light source to irradiate UV resin (UV glue, ink, adhesive, coating) with ultraviolet light, achieving rapid curing of the resin. Precision bonding is achieved by concentrating UV light on the UV resin applied to micro surfaces such as lenses of CD, MD, DVD players, and LCD panels of laptops.

● Optical industry
Lens bonding and assembly of lens groups, prisms, and optical engines; Microscope, endoscope, infrared device, night vision device, probe assembly, etc.

● Optical communication industry
Passive component bonding (bonding or encapsulation of various glass packaging structures, fixing of small components).
Adhesive bonding of active devices (coaxial devices, laser collimators).

Microelectronics and Semiconductor Industry
LEC LCD encapsulation, pin and FPC bonding, sensor production, mobile phone component assembly, hard disk head assembly, motor and component assembly, components (capacitors, inductors, various plugs)
Precision electronic manufacturing of components, screws, chips, etc.

● Medical industry
Various catheter adhesives and precision instrument adhesives.

● Scientific research
Photocatalysis, photoexcitation, photosynthesis, and various scientific research experiments.

Model		BUV-6B
Number of irradiation head links		1-4 independent LED illumination heads
Illumination mode	Manual mode	Exposure time (cyclic irradiation without stopping), irradiation power (0% to 100%)
	Automatic mode	Exposure time range: 0 seconds to 9999.9 seconds (with an interval of 0.1 seconds), complete the irradiation according to the set time. Output power: 0% to 100%
	Manual Program Control Mode	Up to 6 types of programs can be set, with 8 steps. The power and time for each step can be freely set and triggered according to the set number of steps
	Automatic Program Control Mode	Up to 6 programs and 8 steps can be set, and the power and time for each step can be freely set. Only triggering once can complete all irradiation programs
external control	way	RS232 port and I/O port (can communicate with PLC and robot)
	external input	Radiation start/stop, emergency stop, interlock, individual/all start/stop, product variety switching, foot switch can control the start/end of irradiation
	external output	UV irradiation output, irradiation alarm, READY signal, BUSY signal,+5V output signal
Display content and method		Using LCD display to show the number of channels, power, Setting irradiation time, monitoring temperature, cumulative irradiation time, fault status number, irradiation mode
Alarm display content		LED irradiation head high temperature protection and monitoring, abnormal operation (such as not powered off, plugging and unplugging the irradiation head), leakage alarm, open circuit/short circuit alarm, etc
Cooling mode		Fanless natural cooling
Voltage usage range		AC adapter: INPUT: 100V-240V 50/60HZ OUTPUT: 7.5V 4A
power consumption		15W
Usage temperature/temperature range		0 ℃ to 45 ℃ (no frost below 85%)
Storage temperature/temperature range		0-10 ℃ to 60 ℃ (no frost below 85%)
CONTROLLER SIZE		WxHxL(98X138X160)
Weight		About 1000G

Technical parameters of irradiation head:

Illumination Head (Standard/Ultra High Intensity Series)	F6B/HF6B series
Spot diameter (mm)	φ3	φ4	φ6	φ8	φ10	φ16
Recommended working distance for irradiation (mm)	10	10	18	15/18	30	30
Maximum irradiation intensity (peak) (mW/cm)²)	9600/12000	5600/8000	2800/3500	1600/2800	980/1600	160/560
Type of wavelength	365/385/395/405/420/470/520nm±5nm
Inferring lifespan of light source (Initial setting at 70%, at an ambient temperature of 25 ° C)	20000-40000 hours
Output light intensity range	0-100%
Memory storage function	Built in cumulative total irradiation time chip (Note: The total irradiation time of the irradiation head can be read by different controllers or channels)
Optical power feedback function	Equipped with automatic optical power compensation adjustment function
Cooling method	Natural cooling (internationally leading natural cooling heat dissipation technology)
Monitoring function	Built in temperature detection and monitoring chip (providing real-time feedback on the temperature of the irradiation head)
Light source type	LED level is 3B, in compliance with JISC6802 standard
Environmental temperature/temperature range	0 ° C to 45 ° C (no condensation below 85%)
Storage temperature/temperature range	-10 ° C to 60 ° C (no condensation below 85%)
Suggested installation location for fixtures	Illuminate the head and tail (without heat dissipation rings)
Note: 1. Fixed on standard installation accessories, at an ambient temperature of 25 ℃ and 100% output.