France Oushen PCB circuit board power surge protection [beam lightning protection]

NegotiableUpdate on 04/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

French Oushen PCB circuit board power surge protection model: SDD-7310 SDD-7311 SDD-731 2

Product Details

Key Features:
1) Small size, designed specifically for PCB circuit board applications;
2) Equipped with aging thermal release function;
3) Excellent parameter consistency, can be used on a single chip or in parallel with multiple chips, thereby increasing the discharge current parameters.

Installation method
1. The power connection wire should be a multi stranded copper wire with an area of not less than 6mm2, and the grounding connection wire should be a multi stranded copper wire with an area of not less than 10mm2. The connecting wire should be as short, straight, and thick as possible.
2. The front end of the lightning arrester should be connected in series with suitable backup protectors, fuses, or air switches.
Installation precautions
1. During installation, the power must be disconnected and live operation is strictly prohibited. The connecting wires must meet the requirements.
2. After installation, insert the lightning protection module into place and check if it works properly.
3. The lightning arrester does not require special maintenance, it only needs to be regularly checked for loose connections and normal status indicators.