Fully automatic induction shower (concealed type)

Fully automatic induction shower

Automatically sensing the coming and going of the human body, the water flow stops when the person arrives, and the water-saving effect is very obvious30%---50%above. This product has reliable quality, easy installation and maintenance, and the nozzle shape can be easily replaced.

Has strong anti scaling and anti fouling capabilities, and can be equipped with a magnetizing device

The controller casing adopts permanent sealing technology, which is not afraid of moisture and water.

Special measures have been taken in terms of circuits and structures for the thick fog in winter bathrooms in the north, even when visibility is low2It still works normally in the thick fog of rice

Product working principle

Each set of nozzles mainly consists of an automatic controller that emits infrared radiation and a shower nozzle with an electromagnetic valve. The core component inside the controller is a microcomputer, which controls various actions.

After the power is turned on, the controller will continuously emit encoded infrared light waves forward. When this light wave hits the human body, it will refract back and be sensed by the receiving tube in the controller. After being judged by the computer, it will immediately be converted into an electrical signal and output to the solenoid valve. After the solenoid valve is powered on, it will open the nozzle and release water through the attraction of the magnet. After the human body leaves the controller at a certain distance, the solenoid valve will automatically close.

Application

Baths and showers for enterprises, factories, hotels, governments, businesses, etc.