Fully automatic sliding door cargo shower room

Introduction to Automatic Sliding Door Cargo Shower Room
The cargo shower room is a necessary passage for goods to enter and exit the clean room, and also serves as a closed and clean airlock. It is an effective equipment for purifying goods and preventing outdoor air pollution in the clean area.
In order to reduce the large amount of dust particles caused by the entry and exit of goods, the clean airflow filtered by the high-efficiency filter is sprayed onto people from all directions through a rotatable nozzle, effectively and quickly removing dust particles. The cleaned dust particles are then filtered by the primary and high-efficiency filters and recycled to the air shower area.
1. Adopting arc corners that are more suitable for cleanroom principles, this product has a patented appearance and national patent number:. 1;
Functional patent product, national patent number:. 0; .x； .6；
.4； . 5, a total of six national patented products;
2. Purification level: Static thousand level;
3. The overall material of the box is A3 cold-rolled steel plate with multiple layers of acid pickling and electrostatic spraying. The inner bottom plate is made of stainless steel plate, which is wear-resistant and easy to clean;
4. There is a partition high-efficiency filter with a filtration efficiency of 99.99% @ 0.5um, ensuring the purification level;
5. Fully automatic infrared induction shower, imported AUTOnise infrared sensor, Chint intermediate relay, soft key touch time relay, LED display and setting shower time, adjustable range from 0-99s, double door automatic locking during shower; Normally, only one of the doors can be opened, and when entering the clean area through the entrance, the infrared sensor will automatically blow it out. When leaving the clean area, the air shower room will not blow it out to save energy;
6. Equipped with 12 multi angle adjustable all stainless steel nozzles, with left and right sides for spraying, embedded installation; External rotor high air volume low-noise fan, with a surface wind speed greater than 25m/s, ensuring that the wind can blow onto the goods up to 18m/s, in compliance with national standards;
7. Adopting LCD time display, the air shower time can be adjusted from 0 to 99 seconds, and the air shower time is displayed;
8. Adopting a unique air freshening function system to eliminate odors generated in long-term enclosed air shower rooms and air shower channels;
9. Power supply: 3N, 380V, 50HZ, 1.1KW;
10. Install a high-tech humanized intelligent voice prompt system;
11. When this product leaves the factory, it is tested one by one according to the US Federal Standard 209E and has high reliability.
KLC-AAS series air shower rooms and air shower channels now have nine practical functions to choose from:
1. The photoelectric induction automatic function system can adjust the door delay time.
2. Automatic identity recognition system (with built-in readable sensor card).
3. Automatic ozone sterilization function system.
4. Automatic UV sterilization function system.
5. Automatic anti-static ion generation function system.
6. Adjustable delay door opening function system (in order to prevent dust from flying into the clean area after blowing, the door can only be opened and enter the clean area after a pre-set time after blowing is completed).
7. Filter failure warning function system (can automatically remind to replace the high-efficiency filter when it reaches the final resistance).
8. Automatic self-cleaning function (the air shower room runs automatically every 2 hours to maintain cleanliness when not in use).
9. Special industries (such as automobile manufacturing) do not require shoe replacement and have automatic sole cleaning function.