Fully automatic tableware shrinking machine

Product Name: Fully Automatic Tableware Shrinking Machine Product Model: XJ-450A Product Introduction: The fully automatic tableware shrinking machine is a fully automated and unmanned packaging machine that can be used with automated packaging assembly lines. It automatically completes feeding, bagging, sealing, cutting, and shrinking

Product Name: Fully Automatic Tableware Shrinking Machine

Product model: XJ-450A

Product IntroductionThe fully automatic tableware shrinking machine is a fully automated and unmanned packaging machine that can be used in conjunction with automated packaging assembly lines. It automatically completes feeding, bagging, sealing, cutting, and shrinking.

Scope of application:Tableware, cosmetics boxes, facial cleansers, gift boxes and other catering industries, hardware industries, cosmetics industries, etc.

Technical Specifications:

Model: XJ-450A

Large packaging size: (L+H) ≤ 500mm (W+H) ≤ 430mm (H) ≤ 130mm

Large sealing size: (L) 550 × (W) 450mm

Packaging speed: 15-30 packs/minute

Power supply and total power: 220V/50Hz 1.3kw

Gas source used: 5.5kg/cm3

Machine weight: 300kg

Machine dimensions: (L) 1850 × (W) 1000 × (H) 1600mm

Model: XJ-500

Large packaging size: (L) 700 × (W) 450 × (H) 250mm

大封口尺寸： (L)1200×(W)500×(H)300mm(炉腔尺寸)

Packaging speed: 30-50 packs/minute

Power supply and total power: 380V/50Hz 12kw

Using gas source:/

Machine weight: 220kg

Machine dimensions: (L) 1350 × (W) 750 × (H) 1500mm

Product advantages:

Product Features:

★ The sealing and cutting blade is made of imported special materials, and the surface coating is made of DuPont Furon high-temperature resistant and anti adhesive material, ensuring that the seal does not crack and the sealing line is strong;

★ Adopting two sets of horizontal and vertical photoelectric devices, easy to switch, and can easily complete packaging for thin or small products;

★ Automatic feeding, length can also be adjusted by a combination of photoelectric and timer, equipped with an induction motor, automatic winding of waste materials;

When the size of the packaging changes, the adjustment is very simple, without changing the mold and bag holder;

The sealing and cutting knife has an automatic protection function, effectively preventing accidental cutting of packaging materials;

The sealing and cutting part is equipped with an organic glass protective cover and an automatic alarm function, greatly improving the safety of the operator;

★ Sealing, cutting, and heat shrink packaging are continuously and automatically completed, with stable performance, significant labor savings, reliable quality, high shrinkage efficiency, and strong applicability.

Advanced and exquisite cutting blade display image:

Daily maintenance of the shrinking machine:

(1) The heat shrink machine consumes a large amount of power, so the input power must be greater than the nominal power on the shrink machine nameplate, otherwise it is easy to burn out the circuit or electrical components.

(2) Each machine is equipped with a power cable when it leaves the factory, and the end lead part has the identification symbol of the power supply. It must be connected correctly, and unauthorized operation may result in electric shock.

(3) When the machine specifies a three-phase 380V power supply, the neutral wire must be input simultaneously, which is the standard three-phase four wire system. Otherwise, the machine cannot function properly and is prone to burning out internal electrical components.

(4) The machine must be installed horizontally, otherwise it will shorten the service life of the electric heating tube. For machines with conveyor belts, their inclined installation will cause the conveyor belt to deviate from the center.

(5) When the machine is working, the operator's palms and other parts are not allowed to come into contact with the operating parts of the machine, especially the high temperature inside the contraction chamber, which can easily cause burns.

(6) It should be noted that after the packaging work is completed, the heating switch should be turned off first, and the conveyor motor and fan motor should continue to run for about 10 minutes before cutting off the entire power supply.

Smooth and flat packaging effect: