-
E-mail
www.creatwell.com
-
Phone
15670627782
-
Address
12th Floor, Building 7, No. 169 Xuesong Road, Zhengzhou High tech Industrial Development Zone
Zhengzhou Changwei IoT Technology Co., Ltd
www.creatwell.com
15670627782
12th Floor, Building 7, No. 169 Xuesong Road, Zhengzhou High tech Industrial Development Zone
The GT-CO independent combustible gas detector for measuring artificial gas (hereinafter referred to as the gas detector) is made of high-quality gas sensing components, combined with advanced electronic technology and sophisticated processes. In places where artificial gas is present, once the concentration of carbon monoxide gas reaches the set alarm concentration, the GT-CO gas detector will faithfully emit an audible and visual alarm signal, reminding you to take effective measures immediately; Or activate the linkage device, ventilate or turn off the gas source, eliminate the danger, and effectively avoid the occurrence of malignant accidents such as fires, explosions, and poisoning.
Microprocessor control, high reliability, low false alarms;
On site sound and light alarms trigger the remote networked alarm system;
Ventilation or shut-off of air source linkage device;
This product complies with GB15322.5-2003
Widely used in homes, hotels, apartments and other places, effectively avoiding accidents such as fires and explosions caused by gas leaks.
| sensor type | electro-chemical |
| Detect gas | CO (carbon monoxide) |
| working voltage | AC220V±15% 50Hz |
| Sampling method | Natural diffusion |
| Alarm method | Sound and light alarm |
| alarm volume | ≥70dB |
| anti-interference ability | The concentration that can resist alcohol is 1000ppm |
| Usage temperature | Temperature: 0 ℃~55 ℃ Humidity:<95% RH No condensation |
| alarm response time | ≤ 30s automatic recovery |
| Power consumption | ≤1W |
| Usage environment | Temperature: 0 ℃~55 ℃ Humidity: ≤ 95% RH No condensation |
| detection range | 0~500ppm |
| External dimensions | 125mmx84mmx45mm |
| output function | □ Gas shut-off valve □ Relay contact output |