GTY-CXF point type combustible gas detector

GTY-CXF is a point type combustible gas detector for industrial and commercial use, belonging to the independent detector category. This detector is mainly used in environments where gas may leak, such as small restaurants, shopping malls, and underground utility tunnels. When the gas concentration in the environment exceeds the set concentration, it will sound an alarm through indicator lights and buzzers, and can also drive electromagnetic valves, fans, and other equipment to protect the personal and property safety of users. GTY-CXF is a point type combustible gas detector for industrial and commercial use, belonging to the independent detector category. This detector is mainly used in environments where gas may leak, such as small restaurants, shopping malls, and underground utility tunnels. When the gas concentration in the environment exceeds the set concentration, it will sound an alarm through indicator lights and buzzers, and can also drive electromagnetic valves, fans, and other equipment to protect the personal and property safety of users.

Easy to install, compact structure

low cost

explosion-proof

Stable and reliable

Easy to operate and maintain

Features such as flexible wiring.

Mainly used in environments where gas may leak, such as small restaurants, shopping malls, underground utility tunnels, etc. When the gas concentration in the environment exceeds the set concentration, an alarm will be triggered through indicator lights and buzzers, and equipment such as solenoid valves and fans can be driven to protect the personal and property safety of users.

Sensor type catalytic combustion (flammable)

Natural diffusion sampling method

Indoor usage environment

Working voltage AC220V ± 44V

Power consumption ≤ 3W

Alarm deviation ± 3% LEL

Response time (T90) ≤ combustible gas ≤ 20s (methane)

Set a low reporting value of 20% LEL

Set high reporting value to 50% LEL

Switching quantity 1. Low alarm relay: The common terminal is connected to the normally open end by default (switched to the normally closed end after low alarm), and the contact capacity is 3A@DC30V
2. High alarm relay: The common terminal is connected to the normally open terminal by default (switched to the normally closed terminal after low alarm), and the contact capacity is 3A@DC30V

Continuous monitoring of working mode

Operation mode: infrared remote control

Status indicator ≤ yellow fault indicator light, red alarm indicator light, green indicator normal monitoring status

Working temperature -10~55 ℃ (flammable)

Working humidity ≤ 95% RH without condensation

Environmental pressure ranging from 86KPa to 106KPa

Protection level IP66

Explosion proof method: Explosion proof type

Explosion proof rating Ex d Ⅱ C T6 Gb/Ex tD A21 IP66 T80 ℃ (between detector and controller)

Shell material aluminum alloy

Dimensions 168.4mm x 193.4mm x 82.1mm

The overall weight of the machine is less than 1.2kg

Electrical interface NPT3/4

Use shielded cables with an area of ≥ 1.0mm ², and the outer diameter of the cable should be between 6-9mm.

Sensor lifespan of 3 years (catalytic sensor)