-
E-mail
hsupen@ms14.hinet.net
- Phone
-
Address
No. 351 Fuyang Road, Fengyuan District, Taichung City
Product Categories
Xuben International Precision Machinery Co., Ltd
Gear type hydraulic CNC indexing disc
NegotiableUpdate on 03/26
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Gear type hydraulic CNC indexing disc
Product Details
Specification Table
| model | unit | SUHI-255 | ||
|---|---|---|---|---|
| Disk diameter | mm | Ø255 | ||
| Diameter of the central hole on the disc surface | mm | Ø50H7 | ||
| Central hole penetration diameter | mm | Ø50 | ||
| Center height (for vertical use) | mm | 160 | ||
| Bottom to disk height (for horizontal use) | mm | 205 | ||
| Width of T-shaped groove on the surface | mm | 12H7 | ||
| Bottom key width | mm | 18h7 | ||
| Minimum set angle | deg. | 1° or 5° | ||
| Segmentation accuracy | sec. | ±5 | ||
| Repetitive accuracy | sec. | ±1 | ||
| Locking method | oil pressure | kg/cm² | 35 | |
| Locking torque | N.m | 1750 | ||
| Servo motor model | FANUC | - | α4i / ß8is | |
| Mitsubishi | - | HF-154S | ||
| Gear ratio | - | 1 : 120 | ||
| Maximum disk speed (calculated based on FANUC α motor) | rpm | 33.3 | ||
| Allowable load capacity | vertical | kg | 125 | |
| horizontal type | kg | 300 | ||
| Use the tailstock | kg | 300 | ||
| Allowable cutting force | F | N | 16000 | |
| FxL | N.m | 1750 | ||
| FxL | N.m | 3000 | ||
| Turbine allowable torque | N.m | 250 | ||
| Permissible consistency | J=W.D²/8 | kg.m² | 3 | |
| Turntable weight (excluding motor) | kg | 125 | ||
*Our company reserves the right to change product specifications, dimensions, and design features without prior notice.
Appearance dimension diagram
