German Kaichi HD 10/25 high-pressure water gun

A servo triggered gun with a 10 meter high-pressure tube, a motor protection system with a luminous two tube display, a 1050mm axial rotating stainless steel spray gun rod, a 6-liter cleaning agent tank, a lubricating oil display window, a large water flow rate, a pressure control switch, a Kaichi high-pressure tube anti winding design, and a three hole non-contact rotating nozzle at 0 degrees/25 degrees/40 degrees.

Power supply phase/V/Hz

Water flow rate (adjustable) L/H

Pressure (adjustable) bar/megapascal

The maximum inlet water temperature is Celsius degrees

Connecting load in kilowatts

Machine weight in kilograms

Dimensions (length * width * height in millimeters)

Product Description and Application

The HD 10/25 high-pressure cleaning machine launched by Kaichi Company has set a new standard for cleaning with a water output of 1000 liters per hour and a working pressure of up to 250 bar.

This portable cold water high-pressure cleaning machine not only stands out among similar products with excellent performance data, but also surpasses previous products in the same series in terms of equipment, operational comfort, service life, and cleaning efficiency due to the adoption of multiple innovative technologies.

Space saving accessory storage

Various hooks and storage compartments can directly store nozzles, wires, and gun barrels with water guns on the machine.

Clear and distinct indicator light display

The motor protection electronic two tube indicator light 1 can not only provide information on the working status of the motor, but also display the cause of the fault when it occurs. Oil level 2 and working pressure 3 can also be easily checked from the outside.

Flexible and maneuverable overall machine movement

The upright design of HD 10/25 not only occupies a small area, but also has very flexible operation. The sturdy rubber tires (with a diameter of 300 millimeters) make it easy to climb and descend stairs.

Humanized water gun pulls trigger for more comfortable operation

The water gun that is easy to pick and move is more in line with ergonomic principles, which also enhances the comfort of operation.

Servo pressure controller soft handle, already under application

*Fatigue free operation

The force required to lift the water gun and pull the trigger is significantly reduced, and even after working for a long time, there is no fatigue.

*Simple and precise adjustment

The new Kaichi servo pressure controller allows the operator to comfortably adjust the water flow rate and working pressure through the water gun.

The magnetic core of the servo pressure controller ensures a long service life of the controller.

reliability Long service life

*It is precisely in applications that typically require high product standards that the HD 10/25's long lifespan and high reliability provide * for cleaning.

*Electronic monitoring system

The motor/pump system of HD 10/25 has been protected by electronic devices. Once a malfunction occurs, such as leakage, high/low voltage, or electrical phase problems, the machine will automatically and accurately shut down.

*The long lifespan of HD 10/25 is mainly attributed to the following characteristics:

-Brass cylinder head with stainless steel suction/discharge valve that can resist corrosion from cleaning agents

-Stainless steel plunger with ceramic shaft sleeve

-The four three-phase motor adopts a combined cooling method of air cooling and water cooling (the heat generated by the motor can raise the water temperature to 30 degrees Celsius)^oC）。

Fine mesh water filter

The integrated water filter is equipped with a fine filter mesh with a pore size of 100 µ m, which can protect the high-pressure pump from contamination by impurities in the incoming water. This filter is easy to disassemble and clean.

Widely used in industry, commerce, cleaning companies, environmental sanitation, etc.