Glass glue hard tube capping machine

Hard tube sample

The electric capping machine can be used to roll bottle caps of 5-500ml. When rolling bottles of different specifications, simply place the bottles of that specification on a tray, hold the crossbar with one hand, and loosen the nut on the left side of the crossbar with the other hand to lower or raise the crossbar until the capping head is about 20mm from the bottle cap. Then tighten the nut and use the randomly provided hex wrench to tightly press the support ring against the crossbar and lock it. When tightening, pay attention to aligning the capping head with the bottle cap position. Place the bottle into the lower V-shaped support, loosen the two screws on the support block, move the bottle and the lower V-shaped block together until the capping head is aligned with the bottle cap, and then tighten the two screws on the V-shaped block. YingruiPaste filling machineFour fold strength guarantee, your trusted choice.

Main functional parameters of glass glue capping machine

1) Suitable for sealing single component rubber hoses such as glass glue

2) Horizontal and vertical models are available for selection

3) Pressing speed: 20-40 pieces/minute

4) Equipped with exhaust system

5) Manual pipe installation/automatic cover supply/plug pressing/top exhaust plug, completed in one machine.