Glass upper/lower stage

NegotiableUpdate on 02/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Mainly used for loading and unloading flat glass, insulating glass, and laminated glass

Product Details

Mainly used for loading and unloading flat glass, insulating glass, and laminated glass. This machine uses hydraulic and vacuum systems to remove glass from the glass frame, and sends the glass to the production line through a transmission system. The positioning is accurate, the flipping speed is stable, and it is safe and reliable.

	Maximum specification (mm)		Minimum specification (mm)		thickness range	Minimum radius	output		power supply capacity
	Flat steel	Bending steel	Flat steel	Bending steel	(mm)	(mm)	flat (㎡/h)	弯 (loads/h)	(KVA)
LDGZ2025		2000×2500		400×600	5-19	1000	75	15	480
LDGZ2436		2440×3660		400×600	5-19	1000	135	15	660
LDGZ2450		2440×5000		400×600	5-19	1000	183	15	850
LDGZ2836		2850×3600		400×600	6-19	1300	165	15	810
LDGZ2850		3200×5000		400×600	6-19	1300	225	15	950
LDGZ3250		3200×5000		400×600	6-19	1500	240	15	970
LDGZ3560		3500×6000		400×600	6-19	1800	275	15	1450
LDG2436ZW2436	2440×3660	2440×3660	300×400	400×600	5-19	1000	135	15	670
LDG2442ZW2442	2440×4200	2440×4200	300×400	400×600	5-19	1000	155	15	760
LDG2450ZW2450	2440×5000	2440×5000	300×400	400×600	5-19	1000	183	15	860
LDG2460ZW2436	2440×6000	2440×3660	300×400	400×600	5-19	1000	220	15	1045
LDG2470ZW2442	2440×7000	2440×4200	300×400	400×600	5-19	1000	256	15	1140
LDG2480ZW2450	2440×8000	2440×5000	300×400	400×600	5-19	1000	293	15	1240

Note: All dimensions in the table are in millimeters. Production according to5millimeter80%Loading rate100%Calculation of finished products. The decrease or increase in glass thickness range may cause changes in production line configuration, and the actual product shall prevail at that time.