Grinding wheel pulse industrial dust collector

Polishing dust treatment dust collectorGrinding wheel pulse industrial dust collector

Polishing filter dust collectorWhen there is no signal from the pulse controller, the pulse solenoid valve starts to work. Each time the dust is blown, it takes about 0.1-0.3 seconds to complete, and the high-pressure air sprayed at this moment has a good dust cleaning effect. The significant advantages of industrial vacuum cleaners determine that their application fields are very wide. Air enters the filter cartridge at a high flow rate, causing the filter cartridge to rapidly expand, causing a shock vibration that shakes off the dust attached to the filter cartridge. The fine dust adsorbed on the surface of the filter material is shaken off into the dust collector under the action of the airflow. Mechanical processing and manufacturing industry: Clean up various metal chips and dust, especially for cast iron processing, which shows its effectiveness,

Polishing filter dust collectorSuitable for collecting dust and wet dust such as metal shavings, gypsum dust, cement dust, rubber powder, etc. It can operate 24 hours a day and is equipped with various precision machinery. The industrial dust collector is a single machine filter cartridge dust collector, which is a cabinet type box shaped body structure. It is used for cleaning and sweeping machine equipment, hanging equipment, ceilings, walls, floors, corners and other working conditions. Multiple filters are selected for the filtration section, with different materials, structures, and methods of filtration. Industrial vacuum cleaners use cyclone separators as the first layer of filtration, followed by high-precision filtration through filter cartridges. Used for cleaning deposited dust and debris, especially for daily cleaning of boilers and cleaning of accumulated dust during regular maintenance. The filtration accuracy of ordinary filter cartridges is generally above 1 micron, but through coated or specially treated filter cartridges, the filtration accuracy can reach below 0.3 microns. The application of vacuum cleaners in industry refers to their use in clean rooms,

Polishing dust collectorWorking principle:

It is the high-speed rotation of the vacuum cleaner motor that sucks in air from the suction port, creating a certain vacuum inside the dust bin. Dust enters the dust bag or grid inside the dust bin through the brush head accessory and main suction tube, and is left in the dust bag or bin body. The air filtered by the filter enters the motor pulse blowback type industrial vacuum cleaner, and then flows out through the motor. The filtering material generally uses HEPA (HEPA) filters, which have lower air permeability and are cleaner and safer to filter. Haipa is a Bolaipin, which is an efficient filter that can block very small amounts of dust from pulse blowback industrial vacuum cleaners. Its efficiency reaches 99.97%, and its breathability is relatively low. Therefore, it is made in a wavy shape to increase the breathable area and can be repeatedly cleaned. The filter material of non-woven dust bags or paper bags is more ideal, and can be disposed of after a certain degree of use, which is hygienic and convenient.

Polishing filter dust collectorBasic maintenance methods:

(1) The cleaning and replacement of filter bags may cause the filter cloth to become stiff due to the high viscosity of dust during use, which can increase the resistance of the dust collector and affect the dust removal effect. After the above situation occurs, the filter bag needs to be removed from the dust collector and the surface of the filter cloth needs to be rinsed with clean water. After rinsing is completed and dried, it can continue to be used. The cleaning cycle of the filter bag is determined by the user based on the nature of the dust in their unit and the frequency of use of the dust collector. In general, filter bags will gradually deteriorate after one year of use, mainly due to dust abrasion, high temperature, and high humidity causing deterioration of the filter material. The dust collector cannot use damaged filter bags for operation, otherwise it will affect the dust removal effect. Users should promptly replace the filter bag with a new one.

(2) Exclusion method for pulse valve not working: ① Restore power supply or repair the dust cleaning controller; ② Carefully clean the pulse valve; ③ Replace the pulse valve coil; ④ Check the pneumatic system and compressor.

The possible reasons could be: ① power outage or malfunction of the dust cleaning controller; ② There are impurities inside the pulse valve, and it keeps leaking air; ③ Pulse valve coil burnt out; ④ The compressed air pressure is too low.

(3) Troubleshooting method for low running resistance: ① Check the pipeline and repair the damaged area with welding; ② Check and replace the filter bag;

The reason may be: ① Short circuit of smoke;

Polishing filter dust collectorchoose:

When choosing a vacuum cleaner, reliable quality, functional use, and easy operation should be taken as reference. In addition to understanding the structure and power, the number of additional functions should also be considered, mainly based on the following six points:

1. Vacuum cleaner suction size (when choosing a vacuum cleaner, where it is used, what it mainly sucks, whether the particles are large or small, vacuum cleaner suction is the key. When it comes to suction, the following high-pressure fans with high suction can be considered)

2. The capacity size of the dust collector (usually 15-30 liters for office use, 60-200 liters for industrial use, choose the appropriate capacity)

3. Is it convenient to clean dust? Industrial vacuum cleaners generally have two types of debris. 1、 Dust collector finger type; 2、 Internal dust collection bucket type, selected according to different customers.

4. Industrial vacuum cleaner filter element: Different filter materials can be selected according to the on-site usage environment, and high-precision filter elements are recommended for fine dust.

5. Power supply device: Power supply devices can be divided into wired and remote control according to the situation.

6. The quality of industrial vacuum cleaners can be roughly judged by the appearance of plastic parts, in addition to their place of origin and brand. Products with poor appearance generally have poor quality. The internal quality can be judged from the level of motor noise, the strength of air suction, and other aspects. When checking, also pay attention to whether the hose and interface are leaking, and whether the accessories and spare parts are complete.

Polishing filter dust collectorNotes:

1. Installation location: It must be installed indoors in a place that is not affected by wind and rain

2. Environmental temperature: below 40 ℃

3. Relative humidity: below 80%

4. Air quality: If there are corrosive or flammable gases such as acids and alkalis in the air, they should not be transported by high-pressure blowers to avoid danger

5. Dust protection: Avoid using in places with large amounts of dust, powder, or fibers. If it is necessary to use in such places, please install a filter and regularly clean the dust attached to the filter and inside the high-pressure blower

6. Ventilation and heat dissipation: Please choose to use it in a well ventilated place and not in a sealed room or box

7. Placement space: For the convenience of column maintenance or repair, please avoid installing in overly narrow locations

8. Avoid vibration: Please install in a vibration free location; If the vibration in the venue is unavoidable, anti vibration measures must be installed to prevent the high-pressure blower from being damaged by external vibrations.

Polishing dust treatment dust collectorGrinding wheel pulse industrial dust collector