H-800 three-axis rail fully moving column horizontal machining center

1. Bed frame

Made by advanced resin sand casting and box structure design, the material is tough after aging treatment to eliminate internal stress. Combined with box structure design and high rigidity body structure, the machining center has sufficient rigidity and strength, demonstrating the characteristics of cutting resistance and high precision of the whole machine.

2. Transmission shaft
The X/Y/Z axis adopts a linear track sliding rail design. The column, saddle, head, and base are made of advanced resin sand casting and box structure design and manufacturing. The configuration of ribs is strengthened through computer analysis to improve rigidity and stability.

3. Screw rod
The three-axis adopts high-precision double nut preloaded precision ball screws, combined with locking and pulling design of the support seats at both ends, which can eliminate transmission backlash and pre compensate for errors caused by temperature rise, ensuring positioning accuracy.

4. Spindle motor
By using a high-speed motor, the machining center has excellent performance in high-speed, low-speed, light, and heavy cutting (power up to 15/18.5 KW).

5. Spindle head
Adopting a high-precision and high rigidity spindle head, it can withstand heavy cutting and long-term heavy cutting of radial and axial loads, and can maintain high precision in machining over time.

6. Knife magazine (optional)
Adopting a conical/disc-shaped tool magazine, it provides fast, smooth, and reliable tool exchange actions, controlled by PLC software for fast and rapid tool exchange actions, reducing non cutting time.

7. Electrical box
The electrical box is equipped with a heat exchanger to ensure system stability, and the external wiring part has protective coils that can withstand heat and oil and water.

8. Lubrication system
Adopting an automatic depressurization lubrication system for centralized oil supply, and an advanced depressurization intermittent oil supply system, timely and appropriate oil supply is provided to each lubrication point in a timed, quantitative, constant pressure, and individual manner, ensuring that each lubrication position receives lubricating oil at the right time and ensuring worry free operation of the machining center for a long time.

9. Fully dense sheet metal
Under the strong requirements of environmental protection and safety considerations for operators today, Jiasu Precision Machinery has implemented measures for the H-800HORIZONTAL MACHINING CENTERSheet metal design focuses on aesthetic appearance, environmental friendliness, and ergonomic compliance. Fully sealed sheet metal design prevents cutting fluid and cutting fluid from splashing outside the machining center, keeping the surroundings of the machining center clean.

Product model:	H-800 (optional dual)
workbenches
Workbench size:	800X800
Minimum division of workbench:	1 degree or 5 degrees
Workbench indexing accuracy:	10'
Workbench repeatability accuracy:	2'
Maximum load:	1500kg
trip
X/Y/Z axis maximum stroke:	1400/1000/1000
Distance from spindle center to worktable:	90~1090
Distance from the spindle end face to the center of the table:	300~1300
Spindle
Spindle taper hole:	BT50
Maximum spindle speed (standard):	Synchronous belt 6000rpm
Feed rate
Three axis cutting feed rate:	10000mm/min
Three axis fast moving speed:	20/20/20m/min
Ball screw specifications:	5010
positioning accuracy(GB/T18400.4):	0.01
Repetitive positioning accuracy (GB/T18400.4):	0.007
Knife storage compartment (optional)
Knife magazine form:	Mechanical arm type
Tool capacity:	24
Maximum diameter of cutting tool X length:	120X300
Maximum weight of cutting tool:	15kg
Tool specifications:	BT50
Servo motor
Spindle motor:	15/18.5kw
X/Y/Z-axis motors (wide range):	3/3/3/3.0kw
Cooling motor:	0.49kw
General specifications
Gas source requirements:	8KG
Power capacity:	30KVA
Dimensions (length X width X height):	6.0X2.6X3.6m
Net weight (approximately):	14T

Standard configuration:

1. Japanese FANUC/Mitsubishi controller
2. Electrical box heat exchanger
3. Standard RS-232 interface
4. RS-232 transmission cable
5. Fully sealed splash proof device
6. Automatic centralized lubrication system
7. Work lighting
8. Work status indicator light
9. Three phase isolation transformer
10. Toolbox
11. Basic adjustment screws and washers
12. Operating instructions

Select configuration:

1. Guangzhou CNC GSK controller
2. Fourth axis
3. Five axis linkage
4. Elevating chip conveyor with chip collection vehicle
5. Planetary gearbox
6. Oil mist filter
7. Dual exchange workbench

Jiasu Precision Machinery aims to produce advanced precision mechanical products, and through careful design and precision manufacturing, produces Jiasu brand CNC machine tools, injection pull blowing integrated machines and other products. After nearly 20 years of unremitting efforts and development, the brand has won market reputation and is widely recognized by domestic and foreign customers. We sincerely invite domestic and foreign sales agents who are interested to join our team. We will fully respect and protect the rights and interests of agents, and provide comprehensive technical guidance and after-sales service support.

Brand advantages and policy support:

1. The products have modern production bases in Guangzhou, Pearl River Delta;

2. High quality branded products, agents enjoy discounted prices and priority supply of products;

3. Assist agents in completing sales negotiations, technical guidance, and fundraising in all aspects;

4. Support from after-sales maintenance outlets across the country;

5. All levels of agents can receive annual sales performance rewards.

1. Product price: Pricing based on specific customer configurations
2. Logistics costs: negotiable
If you need more specific information, please contact us. Jiasu Precision Machinery will be happy to serve you.