HS-6412 Series 12 port rail mounted full gigabit unmanaged industrial switch

NegotiableUpdate on 12/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Introduction: HS-6412A series is a fully gigabit rail type unmanaged industrial Ethernet switch independently developed by Chengdu Huashu Communication Technology Co., Ltd., which has powerful high-speed communication function. It is a switching device designed using high-speed single-chip switching scheme and Ethernet protocol networking in industrial production environment. It is easy, convenient, fast, stable and reliable in performance

Product Details

Product Introduction:

The HS-6412A series is a fully gigabit rail type unmanaged industrial Ethernet switch independently developed by Chengdu Huashu Communication Technology Co., Ltd., which has powerful high-speed communication capabilities. It is designed using a high-speed single-chip switching solution and uses Ethernet protocol networking in industrial production environmentsSwitchEasy to use, convenient, fast, stable and reliable in performance. Adopting an industrial high-strength IP40 shell design, it has a high EMC protection level, ensuring that the equipment can operate stably and reliably in industrial field environments.

The HS-6412A series can support 2/4 Gigabit Ethernet fiber SFP pluggable module interfaces (LC/SC and other interfaces are optional), as well as 8 10/100/1000Mbps Ethernet electrical ports (RJ45), supporting 10Base-T, 100Base TX, 1000Base-T, as well as full duplex, half duplex, and MDI/MDI-X adaptation. The fiber interface supports 1000Base-X and can be selected from single-mode (SM) or multi-mode (MM) standards.

Main features:

Comply with IEEE 802.3 10Mbps Ethernet standard, IEEE 802.3u 100Mbps Ethernet standard, IEEE 802.3ab 1000Mbps Ethernet standard, and IEEE 802.3x flow control standard;
Adopting a store and forward switching mechanism to support rate adaptability and ensure data integrity
Supports full duplex/half duplex automatic monitoring, adaptive communication methods, and MDI/MDI-X port adaptation. Crossover and through lines can be freely used;
Non blocking switching structure, fully line speed forwarding;
Port automatic MAC address learning and aging function
Port LED status indicator, which can easily detect the link connection, speed, and data transmission and reception status of each port;
Flexible setting of power and fiber optic ports, RJ45 electrical port alarms, while supporting LED, menu alarm prompts, and relay alarm outputs;
Low power design, all using DC-DC switching power supply, high efficiency, low power consumption
Industrial grade standard, fanless structural design
IP40 level protection, corrugated high-strength shell;

specifications	describe
Network standards	IEEE802.3，IEEE802.3u，IEEE802.3x
Supporting media	10BASE-T CAT3, 4, 5 UTP (≤ 100 meters) 100BASE-TX CAT5 UTP (≤ 100 meters) 1000BASE-T CAT6 UTP (≤ 100 meters) SFP pluggable module supports: 1000BASE-X and 100BASE-FX, single-mode/multi-mode fiber, LC/SC interface optional
network interface	8 10/100/1000Mbps adaptive Ethernet RJ45 shielded electrical ports 4 Gigabit SFP modules with single-mode/multi-mode interfaces (LC/SC)
Alarm port	1 relay normally closed/normally open alarm/I/O port control output
Dial switch	4-digit, Super Ring network function enabled/disabled, master/slave device settings
Exchange method	store and forward
flow control	Half duplex back pressure, full duplex IEEE802.3x
Spanning Tree Algorithm	STP/RSTP
exchange capacity	24Gbps
Package cache size	4Mbits
MAC address table	8K
pilot lamp	Power indicator PWR1, PWR2 Equipment running indication RUN Ring operation indication Alarm indication ALARM Electrical port indication LINK/ACT, 10M, 100M, 1000M 100Mbps/1G optical port indication LINK/ACT
Distance	Twisted pair 100 meters (standard CAT3, 4, 5, 6 UTP) Multimode fiber 850nm, 2Km Multimode fiber 1310 nm, 5 km Single mode fiber 1310nm, 20Km Single mode fiber 1310nm, 40Km Single mode fiber 1550nm, 60Km Single mode fiber 1550nm, 80Km
power supply	Support single/dual 24VDC redundant input (10~55VDC)
power terminal	4-core 5.08mm spacing terminal block, overvoltage, overcurrent, reverse connection protection, dual power redundancy protection
power consumption	No load power 6.80W (24VDC/0.28A) Full load power 11.80W (24VDC/0.49A)
operation temperature	-40℃-75℃
storage temperature	-40℃~85℃
relative humidity	5%~95% (no condensation)
mechanical structure	IP40 protection level design, corrugated high-strength metal shell Adopting DIN card rail installation Size: 137mm X 130mm X 70mm (L X W X H)
Industry standards	EMI： FCC Part 15，CISPR (EN55022) class A EMS：EN61000-4-2 (ESD)，Level 4 EN61000-4-3 (RS)，Level 3 EN61000-4-4 (EFT)，Level 4 EN61000-4-5 (Surge)，Level 4 EN61000-4-6 (CS)，Level 3 EN61000-4-8，Level 5
impact	IEC 60068-2-27
free fall	IEC 60068-2-32
vibrate	IEC 60068-2-6
warranty	5 years
authentication	CE, FCC, RoHS, UL508 (under certification) Please check the company's relevant website for the latest certification updates of the product

图片关键词

Product Introduction

HS-6412 Series Product Introduction 2.0. pdf

Product manual

HS-6412 Series Product Manual 2.0. pdf

model	port				power input	notes
model	1000M electrical port	Gigabit optical port	interface type	Fiber optic standard	power input	notes
HS-6412A-GTX	8	0	---	---	DC 10～55V	Standard type
HS-6412A-2GSFP	8	2	LC/SC	Single mode/multi-mode	DC 10～55V	Standard type
HS-6412A-4GSFP	8	4	LC/SC	Single mode/multi-mode	DC 10～55V	Standard type
HS-6412B-GTX	8	0	---	---	DC 10～55V	Basic type
HS-6412B-2GSFP	8	2	LC/SC	Single mode/multi-mode	DC 10～55V	Basic type
HS-6412B-4GSFP	8	4	LC/SC	Single mode/multi-mode	DC 10～55V	Basic type

Batch procurement/product customization

Business Hotline: or

: 652503928@qq.com