HS862 Insulation Oil Dielectric Strength Automatic Tester

1HS862 Insulation Oil Dielectric Strength Automatic Testeroverview

This product is a new type of machine designed in accordance with the requirements of the IEC 156 "Determination of Dielectric Strength of Insulating Oil" and GB507-86 standards, fully considering the needs of domestic and foreign users.

This machine uses digital display and locking technology, with intuitive readings and high measurement accuracy. It considers standard electrodes such as spherical, spherical cap shaped, and large flat plates used domestically and internationally, as well as non-standard electrodes such as small gap small flat plates, allowing users to have one machine in hand and meet various requirements. This machine adopts special technology and provides special high-strength insulation transformers, with a large measurement range of 0-60KV, small size, and light weight; As long as the standard grounding wire is reliable, safety can be guaranteed; When the oil breaks down, the overcurrent protection is set to automatically cut off the power supply within 0.02 seconds; This machine is safe and reliable, and can fully meet the requirements for measuring the dielectric strength of various insulating oils.

IIHS862 Insulation Oil Dielectric Strength Automatic TesterWorking principle

This machine adopts an AC reversible motor voltage regulator to automatically and uniformly boost the voltage. When the oil is broken down, the protection system automatically cuts off the circuit. When the oil is broken down, the spark is small and there is no obvious free carbon production. It has been tested six times continuously with low dispersion and does not require stirring between electrodes. The oil cup is placed in a closed glass cover with an interlocking device. Opening the cup can automatically cut off the high-voltage circuit without storing any charge, ensuring personal safety.

IIIMain technical indicators:

• Measurement range: 0-80KVzui Large range measurement
• AC power supply: single-phase 220V, 50Hz
• Boosting speed: 2KV/S ± 5%
• Electrode forms: spherical, spherical cap, (large) flat plate, small flat plate (small gap)
• Voltage distortion:<5%
• Display accuracy: ± 1.5%
• Electrode gap: Small flat plate: 1.25mm, all others are 2.5mm
• Environmental conditions: Temperature between 15-35 ℃, humidity not exceeding 75%
• Volume: 400 * 300 * 300mm

10. Weight: Approximately 25Kg