Hangzhou Salt Spray Test Chamber

NegotiableUpdate on 07/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief description: Hangzhou Salt Spray Test Chamber Test Ka: Salt Spray Test Method, GB2423.18-2008 (Basic Environmental Test Regulations for Electrical and Electronic Products - Test Kb: Alternating Salt Spray Test Method). This device is used to assess the strength of the protective layer (such as electroplating, painting, spraying) of metal materials for components, electronics, and hardware against salt spray corrosion.

Product Details

summary:

Hangzhou Salt Spray Test ChamberIt is made according to GB/T5170.8 and is applicable to GB/T2423.17-2008 (Basic Environmental Testing Procedures for Electrical and Electronic Products - Test Ka: Salt Spray Test Method) and GB2423.18-2008 (Basic Environmental Testing Procedures for Electrical and Electronic Products - Test Kb: Alternating Salt Spray Test Method).

test method

Possible experimental methods:

Neutral salt spray test (NSS test) Salt spray test (SS test)

Acetate salt spray test (ASS test)

Copper Accelerated Vinegar Instinct Test

High temperature damp heat test

Test temperature: neutral salt spray test: laboratory: 35 ℃± 1 ℃, b. saturated air tank: 47 ℃± 1 ℃, acid corrosion test: laboratory: 50 ℃± 1 ℃, b. saturated air tank: 63 ℃± 1 ℃, can also be set according to JIS, CNS and other standards

HangzhouSalt Spray Test Chamberparameter

Product Overview:

The salt spray test chamber (precision type) is made according to GB/T5170.8 and is suitable for testing GB/T2423.17-2008 (Basic Environmental Test Procedures for Electrical and Electronic Products - Test Ka: Salt Spray Test Method) and GB2423.18-2008 (Basic Environmental Test Procedures for Electrical and Electronic Products - Test Kb: Alternating Salt Spray Test Method). This device is used to assess the strength of the protective layer (such as electroplating, painting, spraying) of metal materials for components, electronics, and hardware against salt spray corrosion.

Technical Parameter

Model: YWX-60 YWX-90 YWX-120 YWX-160
Indoor dimensions of the test chamber: 600 × 450 × 400 900 × 600 × 500 1200 × 1000 × 500 1600 × 1000 × 500 (mm)
Test box outer box size: 1070 × 600 × 1180 1410 × 880 × 1280 1900 × 1300 × 1400

2300×1300×1400（mm）
Box material: PVC board imported from Germany
Box cover plate: transparent Yagli board
Thermostat: Omron from Japan
Timer: Anliang, Taiwan, China
Accumulator: Italian matcning
Relay: Omron from Japan
Nozzle: Precision glass nozzle, no crystallization
Pressure bucket: made of stainless steel
Special function: equipped with automatic water replenishment device and manual quick mist removal
Laboratory temperature control range: room temperature~65 ℃
Air compressor: customer provided
Safety devices: leakage protection, water shortage protection, over temperature protection
Operating environment: 5-30 ℃, relative humidity ≤ 85% RH

Our company's main products include:High and low temperature (alternating) damp heat test chamber, high and low temperature (alternating) test chamber, high and low temperature (cold and hot) impact test chamber, walk-in high and low temperature alternating damp heat test chamber, high temperature aging room, high and low temperature low-pressure (alternating damp heat) test chamber, high temperature aging test chamber, waterproof (rain) test chamber, flushing device, dustproof (sand/dust) test chamber, single arm drop test machine, salt spray test chamber (precision type), ultraviolet aging test chamber, ozone aging test chamber, xenon climate resistance test chamber, leakage tracing test machine, hot wire test chamber, horizontal vertical combustion machine, horizontal vertical vibration table, simulated automobile transportation vibration table, ultra-low humidity moisture-proof cabinet.

Note: If you have any needs to know about our products, please contact our online customer service. Product sizes can be customized!