High and low temperature compression testing machine

　　High and low temperature compression testing machineEquipped with a high and low temperature test chamber device, this testing machine is specialized for the compressive and shear mechanical properties of composite carbon fiber materials and synthetic resin materials in an environment of -196 ℃~350 ℃. At the same time, the testing machine can also perform various mechanical tests at room temperature, meeting GB/ISO/ASTM/JIS/DIN/FUL/FL/JIS and other testing standards.

High and low temperature compression testing machine models: FL4104GD, FL4204GD, FL4304GD, FL5504GD, FL5105GD;

Technical specifications of high and low temperature compression testing machine:

1. Optional test forces: 5KN, 10KN, 20KN, 30KN, 50KN, 100KN;

2. Test force level: 0.2 level, 0.3 level, 0.5 level;

3. Test force measurement range: 0.4% -100% FS;

4. Displacement rate adjustment range: 0.001mm/min-600mm/min (adjustable arbitrarily);

5. Electronic limit protection, emergency stop button, and software overload automatic protection;

6. High and low temperature test fixture device: stretching, compression, bending, shearing, peeling, tearing, bonding.

Requirements for the operating environment of high and low temperature compression testing machines:

1. The temperature fluctuation should not exceed 2 ℃/h when the room temperature is within the range of 10-35 ℃;

2. The variation of power supply voltage should not exceed ± 10% of the rated voltage. Power frequency 50Hz;

3. There should be a space of no less than 0.7m around the high and low temperature compression testing machine, with a clean and dust-free working environment;

4. Fule tensile machine operates in an environment without significant electromagnetic interference;

5. The high and low temperature compression testing machine operates in an environment without impact or vibration;

6. The relative humidity of the environment in which the high and low temperature compression testing machine is used is below 80%;

7. There is no corrosive medium in the surrounding environment of the high and low temperature compression testing machine.