High and low temperature constant temperature and humidity chamber JK-80L

NegotiableUpdate on 12/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1、 Equipment purpose: This testing equipment is an essential testing device in the fields of electrical appliances, aviation, automobiles, household appliances, coatings, chemical engineering, scientific research, etc. It is used to test and determine the parameters and performance of electrical, electronic, and other products and materials after temperature environment changes for high temperature, low temperature, humidity, or constant tests

Product Details

产品描述

1、 Equipment usage:

This test equipment is an essential testing device in the fields of electrical engineering, aviation, automotive, home appliances, coatings, chemical engineering, scientific research, etc. It is used to test and determine the parameters and performance of electrical, electronic, and other products and materials after high temperature, low temperature, humidity, or constant temperature environmental changes.

model		JK-80L	JK-150L		JK-225L	JK-408L		JK-1000L
Working size (D × W × H cm)		40×40×50	50×50×60		50×60×75	60×80×85		100×100×100
System Principles		Balanced temperature and humidity control system
performance	temperature range	T：-20℃～150℃； F：-40℃～150℃； S：-70℃～150℃
	humidity range	20～98%RH
	Fluctuations/Uniformity	≤±0.5℃/±2℃，±2.5 %RH/+2～3%RH
	warm-up time	-About 35 minutes at 20 ℃ to 100 ℃		About 35 minutes at 20 ℃ to 100 ℃			About 35 minutes at 20 ℃ to 100 ℃
	cooling time	20 ℃~-20 ℃ for approximately 35 minutes		20 ℃ to -40 ℃ for approximately 55 minutes			20 ℃~-70 ℃ for about 80 minutes
control system	controller	Touch sensitive temperature and humidity Touch screen controller, single point and programmable control
	Jie Xidu	0.1℃/0.1%RH
	sensor	Dry wet bulb platinum resistance PT100
	heating system	Nickel chromium alloy electric heating heater
	refrigeration system	Original imported French "Taikang" brand compressors, air-cooled condensers, oil separators, solenoid valves, drying filters, etc
	circulatory system	Adopting an extended shaft motor and equipped with stainless steel multi wing wind turbines that are resistant to high and low temperatures
material	outer box material	SUS # 304 matte line treated stainless steel plate
	Inner box material	SUS # Mirror Stainless Steel
	insulation layer	Polyurethane rigid foam+glass fiber cotton
	door frame material	Double layer high and low temperature resistant silicone rubber sealing strip
Standard Configuration		Multi layer heating defrosting with 1 set of illuminated glass windows, 2 sample racks, and test lead holes (50mm) 1 piece
safety protection		Overtemperature, motor overheating, compressor overpressure, overload, overcurrent protection, heating humidification air burning, under phase and reverse phase
power supply voltage		AC380V ± 10% 50 ± 1Hz three-phase four wire system
Environmental temperature for use		5℃～＋30℃ ≤85％R. H