High and low temperature tensile testing machine

NegotiableUpdate on 01/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The high and low temperature tensile testing machine is an improved model specifically designed for environmental testing. The tensile testing machine is equipped with a high temperature test chamber, which can test the physical properties of materials such as tensile strength, pressure, tear, shear force, peel force, unwinding force, and ring initial adhesion force in different temperature environments When using room temperature testing, the high-temperature chamber can be moved away to increase usage space and convenience.

Product Details

1、 Product Introduction:

The high and low temperature tensile testing machine is a new type of material testing machine with high and low temperature characteristics. Mainly suitable for testing the mechanical properties of materials such as rubber, plastic profiles, plastic pipes, plates, sheets, films, wires and cables, waterproofing membranes, metal wires, etc. under high or low temperature environments, including tensile, compressive, bending, peeling, tearing, etc. Choosing replacement fixtures can be used for material, semi-finished, and finished product tensile and pressure tests at high and low temperatures. Super powerful and easy to operate.

2、 Technical parameters:

Capacity selection: 10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN (optional dual capacity configuration)
Temperature range: 40 ℃~200 ℃ (higher temperature may be required)
Monitor: Computer display mode
Power resolution: 1/500000
Strength accuracy: 0.3%
Travel resolution: 1/500000
Control mode: Full computer operation mode
Temperature control: PID automatic calculation, stable error
Display accuracy: 0.1 ℃
Temperature accuracy: ± 1 ℃
Circulating system: Fan forced circulation system
Heating system: SUS304 stainless steel heat dissipation heater
Protection device: leakage and overload protector
Box material: SUS # 304 stainless steel without embroidery
Experimental itinerary: 300mm
Experimental box space: 30 × 30 × 58cm (W × D × H)
Experimental speed: 0.5-500mm/min, computer setting, with quick adjustment buttons for fixtures up and down
Force unit conversion: kgf, N, Ibf, g, ton, Mpa
Shutdown mode: overload shutdown, emergency stop button, automatic shutdown due to specimen damage, automatic shutdown with upper and lower limit settings, automatic reset function
Machine size: 85 × 160 × 220cm (W × D × H)
Machine power: driven by servo motor, synchronous wheel and precision ball screw transmission
Power: 2KW
Machine weight: approximately 220kg
Electricity usage: 220V 50/60HZ 30A
Standard configuration: fixture extension rod, heat dissipation device, fixture set 1, computer software, USB computer connection

3、 Software Introduction:

The measurement and control system is designed specifically for high and low temperature tensile testing machines. Can conduct tensile, compressive, bending, shear, tear, and peel tests. Using a PC and interface board for data collection, storage, processing, and printing of test results. Can calculate parameters such as maximum force, yield force, average peel force, maximum deformation, yield point, elastic modulus, etc; Capable of curve processing, multi-sensor support, graphical interface, flexible data processing, and MS-ACCESS database support, making the system more powerful.