High temperature and high pressure accelerated aging testing machine

product overview

KM-PCTHigh temperature and high pressure accelerated aging testing machineUsage: Accelerated life testing for products related to national defense, aerospace, automotive components, electronic parts, plastics, pharmaceuticals, and other industries. Used in the design phase of products to quickly expose defects and weak links

This equipment is mainly used to test the performance of products during storage, transportation, and use in high temperature, high humidity, and pressure climate environments. It is mainly used to test the physical and other related properties of electrical and electronic products, components, parts, metal materials, and their materials under simulated high temperature, high humidity, and pressure climate conditions. After testing, the performance of the product can be judged through calibration to determine whether it can meet the requirements for product design, improvement, calibration, and factory inspection. Testing of sealing performance and conducting accelerated life tests on related products

product mix

KM-PCTHigh temperature and high pressure accelerated aging testing machineThe structural form is vertical. The inner box of the test chamber is made of SUS304 textured stainless steel plate, and the outer box is made of brushed stainless steel plate, which is beautiful and elegant. The temperature controller is a Japanese Fuji digital controller, PT100 sensor, pointer pressure gauge, and built-in water storage tank This equipment is equipped with protective devices such as over temperature, under phase, water shortage, pressure, and heating tube burnout.

Meet the standards:

GB2423-2-1-89GB2423-3-2-89GB2423-3-89Execution and compliance with standards for high-temperature, high-pressure, and high humidity aging chambers

GB/T10586-1989Technical conditions for wet heat laboratory;

GB2423.3-93(IEC68-2-3) Constant humidity and heat test;

MIL-STD810DMethod 502.2;

GJB150.9-8Temperature and humidity test;

GB2423.34-86、 MIL-STD883C Method 1004.2 Temperature, Humidity, and High Voltage Combined Cycle Test

Technical Parameter

Model: KM-PCT350/400

Temperature range: RT+10~135℃

Temperature fluctuation: ± 0.5℃

Temperature uniformity: ± 1℃

Humidity range: 100% RH

Test time: 0~999h (adjustable)

Pressure range: 0~3kg/cm2

Test method: two cooking methods

Inner box size (mm) Φ 350 × D500mm/Φ400×D500mm

Outer box size (mm): D850 × W800 × H1650mm,

Temperature range: 100℃～132℃

Humidity range: 100% RH saturated vapor, 100% RH saturated vapor, 100% RH saturated vapor

Pressure range: ambient atmospheric pressure+0-4kg/cm2, ambient atmospheric pressure+0-4kg/cm2, ambient atmospheric pressure+0-4kg/cm2

Circulation mode: natural convection cycle of water vapor, natural convection cycle of water vapor, natural convection cycle of water vapor

Inner box material: Stainless steel plate material # SUS304

Outer box material: stainless steel plate material # SUS304 Time range: 0-999 Hr Pressure time: 0.00 Kg~2.00 Kg/cm2 About 45 minutes

Special requirements can also be customized according to customer requirements

Control system:

Using programmable TIMI580 touch screen to automatically calculate and control saturated vapor temperature, humidity, and time

Automatic water level controller, providing warning when the water level is insufficient

German ultra small high-temperature resistant oil-free vacuum pump

Using a pointer to display positive and negative pressure gauges

Fully automatic process control, easy to operate

Mechanical structure of high temperature and high pressure cooker:

Circular inner box, stainless steel circular test inner box structure, in compliance with industrial safety container standards, designed to prevent condensation and dripping during testing

Automatic access control, circular door with automatic temperature and pressure detection, secure access control and locking, safety door handle design, and back pressure protection for testing when the pressure inside the box exceeds normal pressure

Type packing, when the pressure inside the box increases, there will be back pressure on the packing, which will make it more tightly integrated with the box. Unlike traditional extrusion packing, it can extend the life of the packing

Circular lining, stainless steel circular lining design, can avoid direct impact of steam latent heat on the test sample

Precise design, good air tightness, low water consumption, can last for 200 hours with each addition of water

The vacuum action before the experiment can extract the air from the original box and suck in new air (partial<1 micorn) filtered by the filter core to ensure the purity of the box

Critical point limit automatic safety protection, abnormal cause and fault indicator light display