Horizontal slurry pump

The horizontal slurry pump is a cantilever, horizontal double shell axial suction centrifugal slurry pump. The outlet position of the pump can be installed and used by rotating it at eight different angles at intervals of 45 ℃ as needed.

Horizontal slurryThe pump body has a replaceable wear-resistant metal lining, and the impeller, sheath, protective plate and other overcurrent components are all made of wear-resistant metal. In low flow and low head areas, strong abrasive slurry can be transported; Transport light abrasive slurry in high lift and high flow areas. Suitable for conveying strong abrasive and high concentration slurry in industrial sectors such as metallurgy, mining, coal, power, and building materials.

This type of pump can also be used in series in multiple stages. Packing seal, secondary impeller seal, packing and secondary impeller seal, mechanical seal and other types can be used. The transmission types include DC direct drive, CR parallel belt drive, ZVZ upper and lower belt drive, CV vertical belt drive, etc.

The main working components of a horizontal slurry pump are the impeller and the casing. The impeller device inside the casing is located on the shaft and connected to the prime mover to form a whole. When the prime mover drives the impeller to rotate, the blades in the impeller force the fluid to rotate, that is, the blades do work on the fluid in its direction of motion, thereby increasing the pressure potential energy and kinetic energy of the fluid. At the same time, the fluid flows from the center to the edge of the impeller under the action of inertial force, and exits the impeller at a high speed, enters the extrusion chamber, and is then discharged through the diffusion tube. This process is called the water pressure process.

At the same time, due to the flow of fluid towards the edge at the center of the impeller, a low-pressure zone is formed at the center of the impeller. When it has sufficient vacuum, the fluid enters the impeller through the suction chamber under the pressure at the suction end (usually atmospheric pressure), and this process is called water absorption. Due to the continuous rotation of the impeller, the fluid is continuously discharged and sucked in, forming a continuous operation.

The working process of a horizontal slurry pump is actually a process of energy transfer and conversion. It transfers and converts the mechanical energy generated by the high-speed rotation of the electric motor into pressure energy and kinetic energy of the pumped fluid through the blades of the pump. In the production process, the horizontal slurry pump plays the role of a producer, mixing liquids or solids together to form new materials.