Hydraulic unboxing sand making machine

Applicable materials:Hydraulic sand making machine is widely used for fine crushing of various minerals such as granite, basalt, limestone, river pebbles, cement clinker, quartz, iron ore, bauxite, etc

Application fields:Hydraulic unboxing sand making machine provides high-quality sand and gravel materials that meet standards for industries such as high-grade highways, railways, water conservancy, airports, construction, cement, refractory materials, metallurgy, etc

The hydraulic unboxing sand making machine is an improvement based on our company's product "River Pebble Sand Making Machine". Traditional sand making machines do not have a hydraulic assist system, and disassembling the back cover requires two or three workers to spend one or two hourssand making machineThe introduction of the hydraulic sand making machine has solved this problem. With just one click opening, hydraulic sand making machines with a production capacity of less than 30 tons can open the back cover in just one minute! After opening the lid, not only is it convenient to replace the hammer head, side plate, and top plate, but it can also quickly solve the problem of material blockage!

Advantages of hydraulic unboxing sand making machine：
1. One click switch back cover, the entire process only takes 5 minutes, saving about 3-4 hours of switch back cover time compared to traditional equipment, saving time and labor;
2. Afraid of material blockage? After opening the lid in 5 minutes, the blockage can be dealt with directly, and the entire process only takes 10 minutes.

competitive advantage

working principle

The stone material falls directly from the upper part of the machine into the high-speed rotating turntable; Under the action of high-speed centrifugal force, it collides with another part of flying stones that are distributed in an umbrella shape around the turntable at high speed and undergoes high-density crushing. After colliding with each other, the stones will form vortex motion between the turntable and the casing, causing multiple mutual impacts, friction, and powder crushing, which will be discharged directly from the lower part. Form a closed loop with multiple cycles, controlled by screening equipment to achieve the required particle size.
Hydraulic unboxing sand making machineDuring operation, driven by the electric motor, the rotor rotates at high speed. When the material enters the hammer action area, it collides with the hammer on the rotor and is crushed. It is then thrown towards the counterattack device for further crushing, and then bounced back from the counterattack lining plate to the hammer action area for further crushing. This process is repeated, and the material enters from large to small. The counterattack chamber repeats the crushing process until the material is crushed to the desired particle size and discharged from the discharge port.