Product Categories

Zhongshan Sanyi Measuring Instrument Co., Ltd

E-mail
718248847@qq.com
Phone
18125362172
Address
No. 72 Shentang 1st Road, Third Industrial Zone, Tanzhou Town, Zhongshan City, Guangdong Province

Contact Now

Hydrochloric acid concentration meter

NegotiableUpdate on 01/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Online concentration meters are used to measure the concentration of liquid media in tanks and pipelines. Concentration measurement is an important process control in product production technology, and tuning fork concentration meters can be used as indicators for other quality control parameters such as solid content or concentration values. It can meet various measurement requirements of users for concentration and solid content.

Product Details

Product Description

Hydrochloric acid concentration meter is used to measure the concentration of liquid medium in tanks and pipelines. Concentration measurement is an important process control in product production technology, and tuning fork concentration meters can be used as indicators for other quality control parameters such as solid content or concentration values. It can meet various measurement requirements of users for concentration and solid content.

Measurement range:0～50%、0～100%

Explosion proof type Explosion proof Exd II CT6 Gb

Allowable temperature: -20~110 ℃

Working voltage: DC24V

Electrical interface: M20 × 1.5

Output: 4-20mA (four wire system)

Installation method: flange, clamp and thread installation

1. Petrochemical industry: diesel, gasoline, ethylene, etc.

2. Chemical industry: sulfuric acid, hydrochloric acid, nitric acid, ammonia water, methanol, ethanol, saline water, sodium hydroxide, frozen liquid, sodium carbonate, glycerol, hydrogen peroxide, etc.

3. Pharmaceutical industry: pharmaceuticals, biological fluids, alcohol extraction, acetone, alcohol recovery, etc.

4. Food and beverage industry: sugar water, fruit juice, brewing, cream, etc.

5. Battery and electrolyte industries: sulfuric acid, lithium hydroxide, etc.

6. Environmental protection industry: desulfurization (lime slurry, stone paste slurry), denitrification (ammonia water, urea), wastewater treatment (acid, alkali, salt recovery), etc.

precision	±0.001g/cm³	±0.25%
scope of work	0～2g/cm³	0～100%
repetitiveness	±0.0001g/cm³	±0.1%
Process temperature impact (corrected)	±0.0001g/cm³	± 0.1% (per ℃)
Process pressure impact (corrected)	negligible	negligible

（1) The above accuracy is applicable to the calibration range of 0.8-1.5g/cm3(800﹣1500 kg/m3）

（2) The maximum viscosity of the liquid can reach 2000cP

（3) The temperature effect refers to the maximum measurement deviation caused by the deviation of the process fluid temperature from the factory calibration temperature.

（4) The pressure effect is defined as the change in sensor flow rate and density sensitivity caused by the deviation of process pressure from the calibration pressure.

process temperature	Standard:–25℃～+120℃ Customized:–25℃～+150℃
ambient temperature	–25℃～+85℃
temperature coefficient	20ppm/℃(After correction)
Built in temperature sensor	Temperature chip

Liquid-contacting part	316L、 Hastelloy, titanium alloy, zirconium, etc
Fork tooth polishing	Standard polishing PTFE coating, electrolytic polishing
shell	IP65, aluminum alloy

Maximum work pressure	standard	Within 2.5MPa
	Special Customization	Within 6.3MPa
Test pressure	Under maximum work pressure Test under 1.5 times pressure
The actual maximum working pressure is limited by the rated value of the process connection

Process connection type	flange
	clamp
	thread

Explosion-proof certification

Ex d ⅡC T6 Gb

Power requirements	24 VDC,100mA
output	Four wire system,4-20mA/RS485
electrical interface	M20*1.5

Viscosity requirements

0-2000cP

name	name	molecular formula	Concentration（%）	316L	HaAlloy	titanium alloy	zirconium	PTFE
sour	hydrochloric acid（Excluding hydrofluoric acid	HCI	0-40	×	×	×	×	☆
	sulfuric acid	H₂SO₄	0-50	×	○	×	☆	☆
		H₂SO₄	50-75	×	×	×	○	☆
		H₂SO₄	75-98	×	×	×	×	☆
	nitric acid	NHO₃	0-100	○	○	×	×	☆
	phosphoric acid	H₃PO₄	0-98	×	○	×	×	☆
alkali	sodium hydroxide	NaOH	050	☆	☆	☆	○	☆
	potassium hydroxide	KOH	0-50	☆	☆	☆	○	☆
	calcium hydroxide	Ca（OH）2	0-50	☆	☆	☆	○	☆
salt	sodium chloride	NaCl	0-50	×	☆	☆	○	☆
	ammonium chloride	NH4Cl	0-50	×	☆	☆	○	☆
	ammonium sulfate	(NH4)2SO4	0-50	×	☆	☆	○	☆
other	urea	(NH2)2CO	0-100	☆	☆	○	☆	☆
	Sodium hypochlorite	NaOCI	0-16	×	○	×	×	☆
	hydrogen peroxide	H₂O₂	0-90	☆	☆	○	☆	☆
☆ Recommended ○ Use under specific concentration and temperature restrictions Not used

SDT600-4B	□	□	□	□	□	□	□	Tuning fork density/Concentration meter
measuring medium	A							density
	B							Hydrochloric acid concentration
	C							sulfuric acid concentration
	D							Ammonia concentration
	E							Alcohol concentration
	F							Sodium hydroxide concentration
	X							other
measurement range		R1						0～1.5g/cm3
		R2						0～2g/cm3
		R3						0～50%
		R4						0～100%
		RX						other
Process interface			A					2'150LB flange
			B					2'300LB flange
			C					Dn50PN16 flange
			D					Dn50PN25 flange
			E					2 'clamp
			F					3 'clamp
			G					G3/4 thread
			H					G1 thread
			X					other
wetted material				1				316L
				2				titanium material
				3				Zirconium material
				4				HaC
				X				other
surface treatment					A			Standard polishing
					B			Electric polishing
					C			PTFE coating（PTFE）
Insert length						L1		Standard length（150mm）
						L2		100mm
						L3		200mm
						L4		300mm
						L5		500mm
						LX		other
Attachment							F0	none
							F1	mounting bracket
							F2	Bypass pipeline
							F3	Circulation room
							F4	rinse mouth
							F5	Flange support
							F6	protective shield
							X	other