IPX12 Vertical Drip Rain Testing Machine [Recommended by Yue Xin]

NegotiableUpdate on 03/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Introduction IPX12 Vertical Drip Test Machine is suitable for conducting IPX1 and IPX2 waterproof level tests on products

Product Details

lProduct Introduction

IPX12 Vertical Drip Test MachineSuitable for conducting IPX1 and IPX2 waterproof rating tests on products.Wall mounted structure:rackFixed against the wallEnsure smooth operation of the drip board. The equipment rack is made of aluminumProfileManufacturing, the sample turntable is made of SUS304 # stainless steel plate to ensure long-term use without rusting.

lProduct images

lExecution standards

IEC60529:1989 +A1:1999 +A2：2013， ISO20653 《Road vehicles - Protection standards》Figure 3 and Table-7; GB4208-2017Clause 14.2.1 and 14.2.2 of the "Degree of Protection Provided by Enclosures (IP Code)" and Figure 3；GB7000.1 "Luminaires Part: General Requirements and Tests" Clause 9.2.3 Requirements；

VW80000-K10: IPX1, IPX2 test;Table 4 and Figure 3 of GB/T4942.2-1993;

lEquipment parameters

7、 Technical parameters	structure parameters
	Dripping area	About 800 * 800mm
	Equipment external dimensions	make an appointmentLong 1030Depth 1140 height 2420mm
	Drip aperture	￠0.4mm
	Distance between drip holes	20*20 mm
	Turntable diameter	￠600 mm
	Ground clearance height of turntable	600mm
	Function Parameter
	rainfall	1-3mm/min
	Flow regulation method	Manual adjustment
	Drip board lifting height	800-1800mm adjustable
	Turntable lifting range	Non adjustable (fixed)
	Rotating platform load-bearing capacity	50KG
	Tilt angle of turntable	0 ° or 15 ° (horizontal direction)
	Turntable speed	1 r/min can be set
	Test time	0-999 minutes can be set
	Safety protection device	Leakage protection, short circuit protection
	Electrical parameters
	power supply	220V
	power	1.0 kw

lProduct Details

lProduct characteristics

1Suitable for conducting IPX1 and IPX2 waterproof rating tests on products

2Wall mounted structure:rackFixed against the wallEnsure smooth operation of the drip board.

3The equipment rack is made of aluminumProfileManufacturing, the sample turntable is made of SUS304 # stainless steel plate to ensure long-term use without rusting.

4Drip board: Designed with vacuum and made of high rust resistant stainless steel material,.

5Drip board lifting: screw (SUS303 stainless steel T32X6) - nut device driven lifting, withFall preventionAnd stop when encountering obstaclesWaiting for security features. When there is an object pressing against the water tank below,The safety device will stop the water tank from descendingTo prevent damage to the water tank andsample.

6The nozzle contact position is designed with a brass cone shape, allowing for needle replacement without the need for tools; Under the needleInstalled withStainless steel mesh protective coverEffectively prevent experimental operators from accidentally touching the test needle and getting injured.

7Drip flow rate: The flow meter comes with a regulating valve that can be manually adjusted.

8The drip board automatically lifts and lowers, and the nozzle stops automatically when it is located 200mm away from the tested object point (through)Photoelectric switch detection）.