Ice water impact testing machine manufacturer

NegotiableUpdate on 01/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Manufacturer of ice water impact testing machine: the ice water impact testing machine is applicable to the product that may be subject to flushing at different ambient temperatures during transportation, storage or use. The water comes from heavy rainstorm, wind and rain, sprinkler system, wheel splash, flushing or violent sea waves and other conditions to check the product performance indicators and quality management.

Product Details

Ice water impact testing machine manufacturer

1、 Product Introduction

Product Name:Ice water impact testing machine

Product Model: KB-CJ

Ice water impact testing machineIt is applicable to water flushing under different ambient temperatures during transportation, storage or use of the product. The water comes from heavy rainstorm, wind and rain, sprinkler system, wheel splashing, flushing or violent sea waves, and is used for product performance inspection and quality management.

2、 Compliant with standards

Ice water impact testing machineCan meet national standardsVW80000:2009 9.12 Temperature shock test with wave inflow (also known as ice water shock test).

IIIIce water impact testing machine manufacturermainTechnical Specifications
Inner box dimensions	1000×1000×1000mm（WDH）
outer box dimensions	Approximately 1800 × 1450 × 1965mm (W * D * H) based on actual dimensions
Experimental implementation	Heat the experiment to the test temperature. Cycle the surge of the specimen according to Figure 30. Surge must be applied to the entire width of the specimen
Cycle duration	30 minutes
Temperature range of high temperature box	RT+10～150℃
Surge water temperature range	0℃～+4℃
Surge medium (To be provided by the purchaser)	Pipeline water mixed with 3% weight percentage of Alexandra ash (to be provided by the purchaser), with fineness in accordance with ISO12103-1, must ensure continuous mixing
Experimental water	Go to Zi Li Shui (to be provided by the buyer)
Surge time	3 seconds
water flow rate	3L～4L， Each surge/each nozzle
Distance from nozzle to sample	300～350mm
number of nozzles	1 set
Test cycle times	100 times
Temperature Resolution	0.1℃
temperature fluctuation	±0.5℃
Temperature Uniformity	±2℃

4、 Equipment construction
Fixed test sample	The bottom of the test box is welded into a mesh structure with channel steel, and steel plates are laid on the upper surface for installing the motor. The right side plate of the test box is reinforced with holes for installing the sample fixing frame. The bottom of the test box is welded with channel steel and connected to the base for support. A 1.2mm thick steel plate is laid on top for strengthening the installation of the generator, and the steel plate is welded to the outer wall of the inner tank of the test box.
Box material	Inner box material: SUS316 # stainless steel 1.2mm thick; Outer box material: SUS304 # stainless steel 1.0mm thick; The control box and test box are integrated; Recycling spray water at the bottom of the test chamber; The spray swing pipe is located in the middle of the test chamber and is fixed on one side;
test hole	1, diameter 50mm, power supply and socket to be provided by the user
door of the box	The door; Explosion proof handle
observation window	There is a window on the door, which is equipped with a wiper
lighting	Indoor lighting fixtures
distribution control cabinet	Main power circuit breaker, human-machine interface controller, distribution board, cooling fan, over temperature protector, water pump.
Return water system	Adopting bottom recycling and reuse to achieve water conservation
Mud and water supply system	The mud water supply tank is made of SUS316 # stainless steel, and is equipped with a mud water anti crystallization mixing device, mud water supply pump, and water supply pipe pressure regulating device to ensure constant pressure and flow supply for spraying
Mud and water replenishment	By using manual water replenishment method, the prepared mud and water can be directly introduced into the mud water tank
Pipeline cleaning system	To prevent blockage caused by soil crystallization in the pipeline, the automatic start of clean water supply will be carried out after the experiment to clean the soil inside the pipeline. A professional clean water supply solenoid valve will be used
Clear water supply	Directly connect to the water supply pipe, with a requirement of a water supply pressure of ≥ 2kgf/cm2
Mud and water preparation (to be provided by the purchaser)	Use 3% Arizona powder in mud water (note: if the customer needs deionized water as the test medium, please bring your own pure water machine)