Imported steam safety valve

Product Name:	Imported steam safety valve	Product Model:	Buhrer
Drive mode:	automatic	Connection form:	flange
Structural form:	Fully open type	Sealing structure:	PTFE, hard seal
Pressure range:	150-4500LB	Nominal diameter:	DN15-400
Common materials:	WCB, 304316, alloy steel, etc	Technical Consultation:

Product Introduction The imported steam safety valve produced by Breyer can be driven automatically, connected with flanges, and have a fully open structure. The sealing structure can be made of PTFE, hard seal, with a pressure range of PN150-4500LB, a nominal diameter of DN15-400mm, and materials such as WCB, 304, 316, alloy steel, etc. Due to the wide range of valve applications, the same type of valve can have different combinations in different situations and working conditions. If you are a non professional, please feel free to call our company for consultation. Our company has professional technical personnel to serve you! Technical Department Phone: Product Details

Imported steam safety valve - The Buhrer brand series from the United States is a spring fully open safety valve with flange connection, fully complying with ANSI standard requirements. They can quickly open when the overpressure does not exceed 5% of the set pressure, especially suitable for applications where the medium is steam and gas and the maximum flow rate must be quickly discharged.
Safety valve product specifications:

1 inch to 16 inches

The maximum set pressure can reach 850 bar-g

Emission temperature ranges from -268 ℃ to 550 ℃

The flange pressure rating ranges from 150LB to 4500LB

Characteristics of safety valve products:

Flange connection, DIN and ANSI standard flanges

Threaded connection, NPT/BSP/G standard thread

The nozzle and valve core are both suitable for handling steam, gas, and liquid simultaneously

The spring has a very wide adjustment range

Single stem, dual guide, center positioning ball design ensures excellent sealing and service life of the safety valve

The safety valve body adopts a dead zone free design, which avoids the possible residual medium and corrosion of the safety valve body during the discharge of the safety valve

The safety valve has fewer components, strong interchangeability, compact external structure, and easy maintenance

Equipped with a closed valve cover

The material of the safety valve body is WCB, 304, 316L, etc

The nozzle and valve core of the safety valve are made of materials such as 304, 316, 317, 316L, MONEL, INCONEL, Hastelloy, etc. All sealing surfaces are treated with Stellite hard alloy welding.