Industrial analyzer KR-8OO

Scope of Application

Suitable for industries such as electricity, coal, metallurgy, petrochemicals, coalification, environmental protection, cement, papermaking, geological exploration, and research institutes to determine the moisture, ash content, and volatile matter of coal, coke, ore, and other substances, and calculate their fixed carbon content and calorific value. It can also analyze the combustible content in fly ash and slag, in accordance with the requirements of the national standard GB/T212-2001 "Industrial Analysis Methods for Coal"

Technical Specifications

Sample weight: (0.5-1.5) g

Maximum operating temperature: 1000 ℃

Temperature control accuracy: 1 ℃

Sample quantity: 1-20 water and ash parts

Volatile fraction 1-24

Test temperature: 105 ℃ (moisture), 815 ℃ (ash content), 900 ℃ (volatile matter)

Testing time: 20 samples, three indicators testing time ≤ 90 minutes

Accuracy: Complies with GB/T212-2001 standard

Accuracy: within the allowable deviation range of the standard sample

Power supply: 220V ± 22V, 50Hz ± 1Hz

Power: ≤ 8kW

Dimensions: 620 × 530 × 760mm, 550 × 580 × 510mm

Instrument Features

Standardized process and accurate results: The testing process, conditions, and results for moisture, ash content, and volatile matter all meet the requirements of national standards and do not require calibration. They can be used for arbitration analysis.

Testing speed is extremely fast: using a multi furnace dual balance structure with a constant temperature drying device, the three indicators of moisture, ash content, and volatile matter can be combined or measured separately. At the same time, testing the three indicators of 20 samples can be completed within 90 minutes.

High degree of automation: Integrating high-precision imported electronic scales into the interior of the instrument, combined with an automatic weighing mechanism, using thermogravimetric analysis to automatically weigh, send, process data, calculate results, print and store reports, etc.

Easy to operate and safe: During the testing process, there is no need to remove or place crucible covers, send samples, or take samples. At the same time, an imported cylinder is used to automatically control the switches on the water and ash covers, avoiding the danger of high temperature radiation and burns.

Strong adaptability: An air compressor can be used to provide compressed air to drive pneumatic devices and assist combustion, without relying on any bottled gas.