Intelligent digital flow integrator

XMZ-105LJA1B0Intelligent digital flow integratorOverview

XMZ-105LJA1B0Intelligent digital flow integratorIntelligent digital flow integratorBased on chips, it is not only suitable for simulating traffic signals but also for integrating frequency signals. The instantaneous flow rate and cumulative flow rate are displayed simultaneously, and this instrument can also be used as a dual flow rate display or a dual barrel tube instrument, with one standard analog signal output. The display adopts a large screen, full dot Chen LCD with backlight, Chinese display, and can measure the flow parameters of saturated vapor, superheated vapor, liquid, and general gas through simple programming, realizing automatic pressure compensation, temperature compensation, temperature pressure compensation, etc. At the same time, it can measure the thermal parameters of hot water, saturated vapor, and superheated vapor, realize automatic pressure compensation, and can also query daily reports, monthly reports, and power outage time records. It can also have quantitative control and is a relatively advanced flow integrator in China.

XMZ-105LJA1B0Intelligent digital flow integratorMain technical features

The input signal can be various linear analog inputs or frequency inputs.

The input signal can be measured by square root or linear analog input and small signal cutoff.

When inputting analog signals, it can output at a frequency of 3-1000Hz

Using non-volatile memory for power failure protection, parameters can be stored for a long time.

When inputting standard signals, the display range is programmable.

All parameters of the instrument are inputted through several operation keys on the panel, and users can set them freely.

XMZ-105LJA1B0Intelligent digital flow integratorMain technical indicators

Installation method: disk mounted

Display mode: instantaneous quantity 4-digit LED and light strip display, cumulative value 6-digit LED or 9-digit LED

Accuracy level: 0.5 ± 1d, resolution: 1 word in the last digit

Input impedance and other characteristics: Current signal: below 250 Ω

Voltage signal: below 1M Ω

Frequency signal: 0.1-10KHz amplitude voltage ≥ 1V

Output section: 1. Two channel alarm output, optional working mode, output contact capacity 220V, 3A, no inductive load

2. Analog transmission output: 4-20mADC, 1-5V load below 500 Ω

0-10mADC, 0-5V load below 1K Ω

Insulation impedance: above 50M Ω

Insulation strength: 150VAC, no breakdown or arcing phenomenon for one minute

Working power supply: 220VAC ± 10% 50 Hz ± 2 Hz; 24VDC±10%

Working environment: Temperature: -10~50 ℃, humidity: below 85% RH, no corrosive gases, no vibration.

Instrument structure: Dimensions: 160 × 80mm, 96 × 96mm

Hole size: 152 × 76mm, 92 × 92mm

Power consumption: approximately 10W.

Precautions

When storing instruments in the warehouse, they should be placed in a dry, ventilated, and non corrosive gas environment, and the ambient temperature and relative humidity should meet technical requirements.

If the instrument is damaged, it will be repaired free of charge by the manufacturer if it is a manufacturing problem. If it is caused by improper storage or use by the user, the user will be responsible.

This product is guaranteed for 18 months from the date of manufacture by our factory. After the warranty period expires, our factory can also provide customer repair or on-site service.

Equipped with temperature measuring element division number and measurement range;

If there are special specifications, you can negotiate with our company to resolve them.